Shift Fork And Rod, Interlock Pin; Spring, Spacer, Clip - Mazda MX-5 1990 Workshop Manual

J
49 0187 451A
05UOJX·049
SYNCHRONIZER KEY
05UOJX·053
J-40
TRANSMISSION
Shift fork and rod, interlock pin
1. Set the 1 st/2nd shift fork onto the 1 st/2nd clutch hub as-
sembly.
2. Install the 3rd/4th shift fork and 3rd/4th shift rod, and install
the interlock pin into the bearing housing as in Step 4.
Roll pin
Caution
• Install the roll pin with the seam facing as shown
in the figure.
Install a new roll pin into each shift fork.
Spring, spacer, clip
1. Slide the spring and spacer onto the 5th/Reverse shift rod.
While pressing the spacer, install a new clip.
2. Install new clips to the 3rd/4th shift rod and 1 st/2nd shift rod.
3. Verify that the centers of the shift fork and clutch hub sleeve
are aligned properly.
If they are not, select the proper washer for
b~tween
1 st
gear and the mainshaft front bearing, and between reverse
gear and the mainshaft front bearing.
-