Clutch Hub Assembly (3Rd/4Th); Clutch Hub Assembly (1 St/2Nd); Bearing Housing Parts - Mazda MX-5 1990 Workshop Manual

J
lij·nijCl.,IOi
TRANSMISSION
Disassembly note
Clutch hub assembly (3rd/4th)
1. Position the SST between 2nd and 3rd gears.
Caution
• Hold the mainshaft with one hand so that it does
not fall.
2. Press the mainshaft out of the clutch hub assembly (3rd/4th)
and 3rd gear.
97UOJ1-028
Clutch hub assembly (1 st/2nd)
Caution
• Hold the mainshaft with one hand so that it does
not fall.
Press the mainshaft out of the clutch hub assembly (1 st/2nd)
and 2nd gear.
97UOJ1-029
Bearing Housing Parts
Disassemble in the order shown in the figure, referring to Disassembly Note.
1. Snap ring
2. Adjustment washer
3. Reverse idler gear
Inspection ......... page J-24
4. Thrust washer
J-20
5. Reverse idler gear shaft
Disassembly Note
....................... page J-21
Inspection ......... page J-24
6. Bearing cover
7. Mainshaft front bearing
Disassembly Note
....................... page J-21
Inspection ......... page J-24
05UOJX-021
8. Adjustment shim
9. Countershaft center bearing
Disassembly Note
....................... page J-21
Inspection ......... page J-24
10. Adjustment shim
11 . Bearing housing