Power Plant Frame (Ppf) - Mazda MX-5 1990 Workshop Manual

J
05UOJX-062
______ DIFFERENTIAL MOUNTING SPACER
05UOMX-078
05UOMX-080
05UOMX-081
J-46
TRANSMISSION
I nstallation note
Transmission
Tilt the engine by pushing up on the front of oil pan with a
wooden block and a jack for easy installation of the trans-
mission.
Power plant frame (PPF)
1_ Install the differential mounting spacer.
Tightening
torque~
37-52 N·m (3.8-5.3 m~kg, 27-38 ftoulb)
2. Support the transmission with a jack so that it is level.
3. Position the PPF and snugly tighten the transmission-side
bolts by hand.
4. Verify that the sleeve is installed into the block.
Note
• The reamer bolt is installed in the forward hole.
5. Install the spacer and bolts, then snugly tighten them.
6. Snugly install the power plant frame bracket.
7 _ Tighten the transmission-side bolts.
Tightening torque:
104-123 N·m (10.6-12.6
m-kg,
77-91
ft-Ib)
8. Tighten the differential-side bolts.
Tightening torque:
104-123 N·m (10.6-12.6 m-kg, 77-91 ft-Ib)