Figure 44: Mounting The Switch On Front Posts Of A Rack; Figure 45: Sliding The Rear Mounting-Blades Into The Side Mounting-Rails - Juniper EX4300 Hardware Manual

EX4300 Switch Hardware Guide
172

Figure 44: Mounting the Switch on Front Posts of a Rack

1— Side mounting-rail
Have a second person secure the front of the switch to the rack by using the appropriate
6.
screws for your rack.
Slide the rear mounting-blades into the side mounting-rails. See
7.

Figure 45: Sliding the Rear Mounting-Blades into the Side Mounting-Rails

1— Rear mounting-blade
2—Side mounting-rail
Attach the rear mounting-blades to the rear post by using the appropriate screws for
8.
your rack. Tighten the screws.
Ensure that the switch chassis is level by verifying that all the screws on the front of
9.
the rack are aligned with the screws at the back of the rack.
2— Front-mounting bracket
Figure 45 on page
3— Switch
Copyright © 2017, Juniper Networks, Inc.
172.