Contacting Customer Support To Obtain Return Material Authorization; Packing An Ex4300 Switch Or Component For Shipping - Juniper EX4300 Hardware Manual

EX4300 Switch Hardware Guide

Contacting Customer Support to Obtain Return Material Authorization

Related
Documentation

Packing an EX4300 Switch or Component for Shipping

262
If you are returning a device or hardware component to Juniper Networks for repair or
replacement, obtain a Return Material Authorization (RMA) number from Juniper Networks
Technical Assistance Center (JTAC).
After locating the serial number of the device or hardware component you want to return,
open a Case with Juniper Networks Technical Assistance Center (JTAC) on the Web or
by telephone.
Before you request an RMA number from JTAC, be prepared to provide the following
information:
Your existing case number, if you have one
Serial number of the component
Your name, organization name, telephone number, fax number, and shipping address
Details of the failure or problem
Type of activity being performed on the device when the problem occurred
Configuration data displayed by one or more
You can contact JTAC 24 hours a day, seven days a week on the Web or by telephone:
Case Manager at CSC: http://www.juniper.net/cm/
Telephone: +1-888-314-JTAC1-888-314-5822, toll free in U.S., Canada, and Mexico
NOTE: For international or direct-dial options in countries without toll free
numbers, see
http://www.juniper.net/support/requesting-support.html
If you are contacting JTAC by telephone, enter your 11-digit case number followed by the
pound (#) key for an existing case, or press the star (*) key to be routed to the next
available support engineer.
The support representative validates your request and issues an RMA number for return
of the component.
Prevention of Electrostatic Discharge Damage on page 313
If you are returning an EX4300 switch or component to Juniper Networks for repair or
replacement, pack the item as described in this topic.
Before you begin packing the switch or component, ensure you have:
commands
show
Copyright © 2017, Juniper Networks, Inc.
.