Chassis Status Leds On Ex4300 Switches; Figure 19: Chassis Status Leds In An Ex4300 Switch - Juniper EX4300 Hardware Manual

EX4300 Switch Hardware Guide
Related
Documentation

Chassis Status LEDs on EX4300 Switches

36
Port LEDs on EX4300 Switches" on page 39
LEDs.
SFP+ uplink modules are shipped with dust covers installed in the ports. QSFP+ uplink
module is shipped with a dust cover installed in one of the ports.
Pluggable Transceivers Supported on EX4300 Switches on page 109
SFP+ Direct Attach Copper Cables for EX Series Switches on page 134
Installing an Uplink Module in an EX4300 Switch on page 241
EX Series Switches Interfaces Overview
An EX4300 switch has three chassis status LEDs (labeled
right of the LCD panel, next to the Menu and Enter buttons (see

Figure 19: Chassis Status LEDs in an EX4300 Switch

1— LCD panel
2— LCD panel Enter button
Table 17 on page 37 describes the chassis status LEDs on an EX4300 switch, their colors
and states, and the status they indicate. You can view the colors of the three LEDs
remotely through the CLI by issuing the operational mode command
for details about the status and link activity
, , and
ALM SYS
Figure 19 on page
3— LCD panel Menu button
4— Chassis status LEDs
show chassis led
Copyright © 2017, Juniper Networks, Inc.
) on the
MST
36).
.