Management Cable Specifications; Table 77: Specifications Of Cables To Connect To Management Devices - Juniper EX4300 Hardware Manual

EX4300 Switch Hardware Guide
Table 76: QSFP+ Direct Attach Copper Cable Specifications (continued)
Model Number Specification
JNP-QSFP-DAC-5M Rate
Connector type
Supply voltage
Power consumption (per end)
Storage temperature
Cable type
Wire AWG
Minimum cable bend radius
Cable characteristic impedance
Crosstalk between pairs
Time delay
Length
Support for Virtual Chassis
configuration
Related
Documentation

Management Cable Specifications

Table 77: Specifications of Cables to Connect to Management Devices

Ports
RJ-45 Console ( CON2 ) port
146
Installing a Transceiver on page 247
Removing a Transceiver on page 249
Table 77 on page 146 lists the specifications for the cables that connect the console (
and management (
MGMT
Cable Specifications
CAT5e UTP (unshielded
twisted pair) cable
Value
40-Gbps full-duplex serial transmission
QSFP+ passive Twinax cable assembly
3.3 V
0.015 W
–40° C through 85° C
Twinax
26 AWG
2.54 cm (1 in.)
100 ohms
1% maximum
4.3 nsec/ft
16.4 ft (5 m)
Yes
) ports to management devices.
Receptacle
RJ-45
Additional Information
"Connecting a Device to a
Management Console by
Using an RJ-45 Connector" on
page 194
Copyright © 2017, Juniper Networks, Inc.
CON )