Uplink Modules - Juniper EX4300 Hardware Manual

Table 5: Components in 48-Port EX4300 Switches (continued)
Switch Models Built-In Ports
EX4300-48T-AFI 48
10/100/1000BASE-T
Ethernet ports and
four QSFP+ ports
EX4300-48T-DC 48
10/100/1000BASE-T
Ethernet ports and
four QSFP+ ports
EX4300-48T 48
-DC-AFI 10/100/1000BASE-T
Ethernet ports and
four QSFP+ ports
EX4300-48P 48
10/100/1000BASE-T
Ethernet ports and
four QSFP+ ports
EX4300-48P-S 48
10/100/1000BASE-T
Ethernet ports and
four QSFP+ ports

Uplink Modules

Copyright © 2017, Juniper Networks, Inc.
Number of
PoE-enabled
Ports
0
0
0
48
48
You can use the QSFP+ ports as network ports or as VCPs to connect the switch in a
Virtual Chassis or a VCF. By default, the built-in QSFP+ ports are configured as VCPs.
You can also use the uplink module ports to connect members of a Virtual Chassis or a
VCF across multiple wiring closets by configuring these ports as VCPs. For more
information about Virtual Chassis, see EX Series Virtual Chassis Overview. For more
information about VCFs, see Virtual Chassis Fabric Overview.
EX4300 switches provide one slot for installing an optional uplink module. You can use
the uplink module ports either to connect the switch to other devices or configure these
ports as VCPs and use them to interconnect EX4300 switches to form a Virtual Chassis
or a VCF configuration by using SFP+ transceivers.
Table 6 on page 10 lists the uplink modules supported on 24-port and 48-port EX4300
switch models. Table 7 on page 10
switch models.
Power Supply
Shipped by
Fan Modules Default
Two fan modules; A 350 W AC power
each with an supply with the
AIR IN
(AFI) label. IN (AFI)
Two fan modules; A 550 W DC power
each with an AIR supply with the
label.
OUT (AFO) OUT (AFO)
Two fan modules; A 550 W DC power
each with an supply with the
AIR IN
label.
(AFI) IN (AFI)
Two fan modules; A 1100 W AC power
each with an supply with the
AIR
label.
OUT (AFO) OUT (AFO)
Fan modules for Power supplies for
this model are not this model are not
shipped by default; shipped by default;
you must you must
separately order separately order
either two either AC power
AIR OUT
labeled or supplies or DC
(AFO)
two power supplies.
AIR IN (AFI)
labeled fan
modules.
lists the uplink modules supported on 32-port EX4300
Chapter 1: System Overview
Supported Uplink
Module
4-port 10-Gigabit
Ethernet SFP+
AIR
uplink module
label.
4-port 10-Gigabit
AIR Ethernet SFP+
label. uplink module
4-port 10-Gigabit
Ethernet SFP+
AIR
label. uplink module
4-port 10-Gigabit
Ethernet SFP+
AIR
label. uplink module
4-port 10-Gigabit
Ethernet SFP+
uplink module
9