Juniper EX4300 Hardware Manual page 164

EX4300 Switch Hardware Guide
Table 75: Software Support for QSFP+ Passive Direct Attach Copper Cables for EX Series
Switches (continued)
Switch Software Support Added
EX4300 switches
EX4550 switches
142
EX4300-24T, EX4300-24P,
EX4300-48T,
EX4300-48T-AFI,
EX4300-48P,
EX4300-48T-DC, and
EX4300-48T-DC-AF
switches—Junos OS for
EX Series switches, Release
13.2X50-D10 or later
EX4300-32F
switches—Junos OS for
EX Series switches, Release
13.2X51-D15 or later
EX4300-24T-S,
EX4300-24P-S,
EX4300-32F-S,
EX4300-48T-S, and
EX4300-48P-S
switches—Junos OS for
EX Series switches, Release
13.2X51-D26 or later
EX4550-32T-AFI,
EX4550-32T-AFO,
EX4550-32T-DC-AFI,
EX4550-32T-DC-AFO,
EX4550-32F-AFI,
EX4550-32F-AFO,
EX4550-32F-DC-AFI, and
EX4550-32F-DC-AFO
switches—Junos OS for
EX Series switches, Release
13.2X50-D10 or later
EX4550-32F-S
switches—Junos OS for
EX Series switches, Release
12.3R5 or later
NOTE: We recommend that you use only QSFP+ DAC cables purchased from
Juniper Networks with your Juniper Networks device.
CAUTION: If you face a problem running a Juniper Networks device that uses
a third-party optic or cable, the Juniper Networks Technical Assistance Center
(JTAC) can help you diagnose the source of the problem. Your JTAC engineer
might recommend that you check the third-party optic or cable and potentially
replace it with an equivalent Juniper Networks optic or cable that is qualified
for the device.
DAC Model Number
EX-QSFP-40GE-DAC-50CM
QFX-QSFP-DAC-1M
QFX-QSFP-DAC-3M
JNP-QSFP-DAC-5M
EX-QSFP-40GE-DAC-50CM
QFX-QSFP-DAC-1M
QFX-QSFP-DAC-3M
JNP-QSFP-DAC-5M
Copyright © 2017, Juniper Networks, Inc.