Belt Cleaner Mechanism; Left Upper Support Plate Removal; Left Frame Plate Removal - Epson AcuLaser Color 2000 Service Manual

EPSON AcuLaser C2000

4.2.22 Belt Cleaner Mechanism

4.2.22.1 Left Upper Support Plate Removal

1. Remove the Operation Panel. (See "Operation Panel Removal" on
page -124.)
2. Remove the Front Inner Cover. (See "Front Inner Cover Removal" on
page -124.)
3. Remove the Top Cover. (See "Top Cover Removal" on page -125.)
4. Remove the Left Cover. (See "Left Cover Removal" on page -125.)
5. Remove the Rear Controller Cover. (See "Rear Controller Cover
Removal" on page -126.)
6. Remove the Rear Cover. (See "Rear Cover Removal" on page -127.)
7. Remove 5 screws securing the left upper support plate. (Upper side: 3
screws, Front rear side: 1 screw each)
Figure 4-58. Left Upper Support Plate Removal
Disassembly and Assembly

4.2.22.2 Left Frame Plate Removal

1. Remove the Left Upper Support Plate. (See "Left Upper Support Plate
Removal" on page -153.)
2. Remove the harness from the harness saddle at the left frame.
3. Remove 4 screws securing the left frame plate.
4. Remove the harnesses from 4 connectors of the belt cleaner control
board on the left frame.
Disassembling Procedure
Figure 4-59. Left Frame Plate Removal
Revision C
153