Stylus C41/42/43/44 series
2.2.6 Paper Guide Upper/Left removal
C A U T I O N
Perform this operation by the following procedures so that the coating
material of the PF roller does not damage.
1.
Remove the upper housing. (Refer to Section 2.2.1)
2.
Place the OHP sheet between the Paper Guide Upper/Left and the PF roller by
rotating the protrusion of the Paper Eject roller gear in CW direction.
Protrusion
Figure 2-19. Place the OHP sheet
Disassembly and Assembly
3.
Press the dowel of the paper guide unit with tweezers, etc., then pull it forward and
remove it.
Figure 2-20. Removing the Paper Guide Upper/Left
Disassembly
Revision B
OHP paper
dowel
25