Enabling Load Balancing For A Global Radius Server Group - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 5
load-balance method
number] [ignore-preferred-server]
Example:
Device(config-sg)# load-balance method least-outstanding
batch-size 30
Step 6
end
Example:
Device(config-sg)# end

Enabling Load Balancing for a Global RADIUS Server Group

The global RADIUS server group is referred to as "radius" in the authentication, authorization, and accounting
(AAA) method lists.
SUMMARY STEPS
1. enable
2. configure terminal
3. radius-server host {hostname | ip-address} [test username name] [auth-port number]
[ignore-auth-port] [acct-port number] [ignore-acct-port] [idle-time seconds]
4. radius-server load-balance method
[ignore-preferred-server]
5. load-balance method
6. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
least-outstanding [batch-size
least-outstanding
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure RADIUS Server Load Balancing
Purpose
Enables the least-outstanding load balancing for
a named server group.
Exits server group configuration mode and enters
privileged EXEC mode.
least-outstanding [batch-size number]
[batch-size number] [ignore-preferred-server]
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
949