Macro Operations (Numeric Keypad Control Block And Utility/Shotbox Control Block); Recalling A Macro Register And Executing A Macro - Sony XVS-9000 User Manual

Macro Operations
(Numeric Keypad Control
Block and Utility/Shotbox
Control Block)
MCRO button
UNDO button RCALL button
STORE button
STORE STATS button
Numeric keypad control block
EDIT ENBL button
Editing buttons
AUTO INS button
Utility/shotbox control block
Display
Numeric keypad buttons
KF MCRO EDIT button
PAUSE button
Edit point
specification buttons
Recalling a Macro Register and
Executing a Macro
A macro operation is performed by recalling a macro
register.
Recalling an empty register allows you to carry out macro
editing operations.
Recalling a register holding a macro executes the macro
immediately.
Recalling a macro register
1
In the numeric keypad control block, press the
[MCRO] button.
The control block switches to macro operation mode,
and the [MCRO] button and [RCALL] button light
amber.
2
Use the numeric keypad buttons to enter the register
number (1 to 250) to be recalled.
For details about selecting a register, see "Register
selection in the numeric keypad control block"
(page 302).
3
Press the [ENTER] button.
When you recall an empty register
This switches the numeric keypad control block to macro
editing mode.
Selecting keyframe/macro editing mode in the utility/
shotbox control block switches the memory recall buttons
to the assignments for macro editing.
When you recall a register holding a macro
This immediately executes the macro.
Notes
• It is not possible to execute more than one macro at a
time.
• If the same macro is recalled during macro execution or
when the macro is paused, the following operation
depends on a setting in the Setup menu.
For details, see "Setting the Macro Execution Mode"
(page 423).
• Individual events stored in a macro are executed
according to the settings in the Setup menu. If you
change the settings in the Setup menu, a saved macro
may not have the expected effect.
• During macro execution, if you switch the control panel
to macro editing mode, the macro currently being
executed stops.
• It is not possible to execute a macro during macro
editing.
346