Registration Clutch (Pl3.1.19) - Xerox Phaser 6180 Service Manual

Registration Clutch (PL3.1.19)

Phaser 6180 Color Laser Printer Service Manual
1. Remove Tray 2.
2. Remove the Rear Cover (page 8-11).
3. Remove the Right Side Cover (page 8-12).
4. Remove the Drive Assembly (page 8-76).
5. Disconnect the Registration Clutch connector P/J233.
6. Release the gray Registration Clutch wiring harness from the clamp, the
hook on the printer frame, and the clamp of the Feeder (PL3.2.1).
7. Remove the E-ring securing the Registration Clutch to the Feeder.
8. Remove the Registration Clutch from the Feeder.
P/J233
Gray
Replacement Note Replacement Note
Ensure to match the color of the Clutch Harness and the color of the
Clutch positioning rib. The Registration Clutch Harness is Gray.
Service Parts Disassembly
Gray
Gray
s6180-254
41