RRP 4-11 No Paper Actuator (PL 16.2)
Fig 4-14 No Paper Actuator
Removal
1.
Remove the Bottom Cover (RRP 4-2).
2.
Use the flat blade of a standard screwdriver to carefully pry the Actuator legs
out of the slots in the frame, and remove the Actuator.
Replacement
1.
Position the Actuator as shown in the figure.
2.
Press the Actuator legs into the slots in the frame.
3.
Rock the Actuator back and forth to make sure it moves freely in the slots, and
the small end of the Actuator moves freely between the two arms of the No
Paper Sensor.
4.
Reinstall the Bottom Cover (RRP 4-2).
4-592
DocuPrint N4525 Network Laser Printer - Service Guide
S4525-291