A Map For Working In Programming - Nortel Modular ICS 6.0 Manual

22 / Getting started with Norstar

A map for working in programming

The tables on the following three pages show the headings that
display when you move through the display menu after pressing
² ¥ ¥ ‚ ¯ ö ì é í
default password is
The default Basic password (
Û Û à Ý Û
codes, including
call services on and off. For more information, see Using
passwords on page 214.
Terminals&Sets
Lines
Services
Sys speed dial
Passwords
Time&Date
System prgrming
Modular ICS 6.0 System Coordinator Guide
and entering the password (the
 ë ÷ é ö
õ  ê é ‚
) can be used with a limited number of feature
¥ ¥ æ é ÷ ä
Customize each telephone on the system. You
can change where a call is forwarded, give a
telephone a name, or allow certain features to be
used at a telephone. You can change the button
programming on any telephone on the system.
Program names for each line.
Turn services on or off: Ringing service,
Restriction service, and Routing Service.
Program up to 255 different telephone numbers
so internal users can dial them with a three-digit
code (001-255).
Change or erase the password you use for
programming, or the one you use for Call log. On
an XC system, you can change the Companion
portable telephone registration password.
Change the time, date, or both.
Access the headings that define Hunt Groups,
Hospitality services. Enter the BusName, which
displays on caller ID lines.
On a MICS-XC system, access registration
records for Companion portable telephones so
you can disable or enable the sets.
Û Ü ß Ý ß
or
or
and the codes for turning
) .
P0992640 03