Nortel Call Center Telephone Administration Manual page 93

To change the destination from pager to telephone or extension
Msg notify
ADMIN SELECT
Modify:pager
CHNG NEXT
Destination:
PHONE EXT PAGER
<xxxx>:
RETRY OK
Notify:<x>
CHNG NEXT
More dest?
YES NO
Chapter 7 Off-premise Message Notification
≤
·°⁄.
1 Press
Follow the voice prompts or the display button options to open the
skillset mailbox.
2
If you use the CallPilot interface:
Press °fi to open the Mailbox Tools
•
Press NOTIF or ¤ to open the Off-premise Message
•
Notification menu
• Go to step 3
If you use the Norstar Voice Mail interface:
Press ADMIN or °
•
Press fl to open the Off-premise Message Notification
•
menu
• Go to step 3
Press ADMIN or ⁄ to change Off-premise Message Notification.
3
The displays shows the first destination type and destination
number.
Press CHNG or ⁄ to change the destination type and the
4
destination number.
5
Choose the type of destination number:
press PHONE or ⁄ to choose a telephone number destination
or
press EXT or ¤ to choose an extension destination.
6 Enter the destination number you want to set up Off-Premise
Message Notification for.
<x> represents the destination number.
Press OK or £ to accept the destination number
or
press RETRY or • to re-enter the number.
Press NEXT or £ to continue.
7
Press YES or ⁄ if you want to set up another destination, and
8
repeat steps 6 through 8
or
press NO or £ if you do not want to set up another destination.
Call Center Telephone Administration Guide
93