Function Key - Oce variolink 9522 User Manual

13
13.5

Function Key

The function key allows you to assign up to five job settings previously stored
using Mode Memory.
This section describes how to make a copy by simply touching a function key
to recall the desired job setting.
!
Detail
For storing job settings using Mode Memory, see page 13-11.
The job setting assignment to the function key can be made in the Utility
mode. For details, see POD Administrator's Reference.
Prerequisites
0 The assignment to the Function key is available only for the job setting
stored using Mode Memory.
0 Up to 5 function keys are provided for the job setting assignment.
0 Function keys are available from Copy Screen only. This function cannot
be used in any other modes (SCAN, STORE, RECALL, JOB LIST, or MA-
CHINE.)
0 Function key will be dimmed to show inactivity if the setting currently
made is incompatible with any copy condition assigned to that key.
0 Function key will be void if the job setting assigned to that key is deleted
in Mode Memory.
1
Position the original.
2
Display the Copy Screen.
– Touch [COPY] tab on the Machine Status Screen to display the
Copy Screen.
13-16
Advanced Information
VarioLink 9522