Tray Empty - Oce variolink 9522 User Manual

Troubleshooting
5.4.2

Tray Empty

If the following popup menu is displayed after touching [Detail Check], the
selected tray has become empty.
Follow the procedure below to change the tray selection for the current job,
or supply the empty tray with paper.
To change the tray selection
1
Touch the desired tray key.
2
Touch [OK] to restore the Machine Status Screen.
3
Press [Start] on the control panel.
Paper will be delivered from newly selected tray to continue the printing
operation.
VarioLink 9522
5
5-55