Stapling Output To The Primary (Main) Tray - Oce variolink 9522 User Manual

Output Setting
Reminder
The primary (main) tray gradually goes down while printed materials are
output. DO NOT allow any object to interfere with the operation of the tray
on the left side of the finisher, as any interference may cause damage to
the finisher.
Be careful not to exceed the finisher tray capacity when selecting the
print quantity, otherwise unexpected trouble may be caused.

11.2.2 Stapling Output to the Primary (Main) Tray

Copies will be stapled in this mode. Follow the procedure below to select the
stapling position and number of staples: Left Corner/ Right Corner (Corner
Staple), Left/ Top/ Right (2 Position Staple).
Procedure
1
Position the original.
2
Touch [Staple] on the Copy Screen.
– Stapled sheets will be delivered to the primary (main) tray.
The Output mode icon shows the stapling position currently select-
ed.
If you want to change the stapling position, proceed to the following
steps.
3
Touch [Output Setting] on the Copy Screen.
The Output Setting Screen will be displayed.
VarioLink 9522
11
11-9