Table of Contents
Advertisement
5
5.5
If "Memory Full" Message Is Displayed: Memory
Overflow
In certain modes, this machine uses memory to make operations convenient
and smooth flowing.
Occasional memory overflow may occur if the installed memory is inade-
quate for the job conditions selected, and the machine will stop its operation
with a popup menu displayed.
Take an appropriate measure described below to continue the operation.
Remedy 1: Memory overflow in current job
When memory overflow occurs while scanning the first job, the machine im-
mediately stops and displays one of the following popup menus.
1
Take either of the following actions.
–
To delete all the scanned data and discontinue the job, touch [Stop
Job].
–
To give up further scanning but print out all the data already
scanned into memory, touch [Stop Scan].
In this case, check the output sheets when printing is completed,
and then reload the original to continue the job.
5-58
Troubleshooting
VarioLink 9522
Advertisement
Table of Contents
Troubleshooting
