Original Setting; Specifying Orientation Of The Original: Direction - Oce variolink 9522 User Manual

Basic Job Settings
9 Basic Job Settings
9.1

Original Setting

This section describes how to specify the original types and direction.
9.1.1

Specifying Orientation of the Original: Direction

Specify the orientation of the original placed in the ADF or on original glass.
Without this setting, the copy results may not be obtained as expected, es-
pecially when making copies under following conditions.
- Copying from double-sided original
- Making double-sided copies
- Combine Originals
- Booklet
- Book Copy
- Staple, etc.
Using ADF
VarioLink 9522
Using original Key
glass
Description
Select for the original positioned with
the top toward the rear of the ma-
chine. Initially selected as factory de-
fault.
Select for the original positioned in
the ADF with the top toward the left
side of the machine.
Or, select for the original positioned
on the original glass with the top to-
ward the right side of the machine.
Select for the original positioned with
the top toward the front of the ma-
chine.
9
9-3