Page 1 Océ VarioLink 9522 Printing for Professionals User’s Guide Copy Operations...
Page 3: Variolink 9522
VarioLink 9522 Copier User’s Guide...
Page 5: Variolink 9522
- Manufacturer and Sales Company will have no liability for any influences caused by using the printing system and this User’s Guide. - The information written in this User’s Guide is subject to change without prior notice. VarioLink 9522 Contents-1...
Page 6: Table Of Contents
Paper Information ................3-3 3.1.1 Paper Weight ..................3-3 3.1.2 Paper Tray/ Exit Tray Capacity ............3-5 3.1.3 Paper Size ..................3-8 3.1.4 Special Paper in Bypass Tray ............3-13 3.1.5 Auto Tray Switch Function ............3-14 3.1.6 To Store Copy Paper ..............3-14 Contents-2 VarioLink 9522...
Page 7 5.4.3 Inconformity in Paper Setting ............5-56 If “Memory Full” Message Is Displayed: Memory Overflow ..5-58 If Power Off/On Screen Is Displayed ..........5-61 If No Response Screen Is Displayed ..........5-63 Troubleshooting Tips ..............5-65 VarioLink 9522 Contents-3...
Page 8 How to Make a Basic Copy ..............8-3 Positioning the Original ..............8-8 8.2.1 Positioning Originals in the ADF .............8-8 8.2.2 Positioning the Original on Original Glass ........8-12 Setting Print Quantity ..............8-13 Setting Job During Warmup ............8-15 To Stop Scanning/Printing .............8-18 Contents-4 VarioLink 9522...
Page 9 To Use Application Function ............10-3 10.2 Inserting Sheets and Covers: Insert Sheet ........10-7 10.3 Locating Title Pages on the Right Side: Chapters ..... 10-16 10.4 Lay Out Several Pages onto One Sheet: Combine Originals ..10-20 VarioLink 9522 Contents-5...
Page 10 10.20 Overlaying Image onto Printed Pages: Overlay ......10-94 10.21 Storing Overlay Image in HDD/ Overlaying Image Stored in HDD: Register Overlay ..............10-96 10.21.1 Registering Overlay Image ............10-96 10.21.2 Recalling Registered Overlay Image ...........10-99 10.22 Copy Conditions Incompatible with Application Functions ..10-102 Contents-6 VarioLink 9522...
Page 11 Job Operation on Job List Screen ..........12-4 12.2.1 Checking/Controlling Reserved Jobs .......... 12-4 12.2.2 Displaying Output History ............12-6 12.2.3 Displaying Send History ............... 12-7 12.2.4 Checking Incomplete Jobs ............12-8 12.2.5 Checking/Operating Suspended Jobs ......... 12-9 12.2.6 Checking/Controlling Spool Jobs ..........12-11 VarioLink 9522 Contents-7...
Page 12 Adjusting Response Time of Touch Keys: Accessibility ....13-21 13.9 Controlling/Monitoring Copier from Browser: Remote Panel ...13-22 13.9.1 Controlling Copier from Browser: Remote Panel .......13-23 13.9.2 Monitoring Copier from Browser: Remote Monitor ....13-25 13.9.3 Monitoring Copier from Browser: Multi Monitor ......13-26 14 Index Contents-8 VarioLink 9522...
Page 13: Energy Star
3 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 min- utes, 90 minutes, 120 minutes or 240 minutes. This function can be disabled in the Utility mode. Automatic Duplex Copying To reduce paper consumption, use this function to make double-sided (du- plex) copies automatically. VarioLink 9522 Contents-9...
Page 14 To reduce paper consumption, use this function to copy a fixed number (2, 4, or 8) of original pages onto one sheet of copy paper. We recommend that you utilize the Auto Low Power, Auto Shut Off, Auto- matic Duplex Copying, and Combine Originals functions. Contents-10 VarioLink 9522...
Page 15: Available Features
Background Removal Manually selects a background exposure level using [Lighter], [Std.], and [Darker] keys provided on the Quality Adjustment Screen. Bind Direction in Original Setting Makes normal copies from double-sided originals being upside-down on the reverse side. VarioLink 9522 Contents-11...
Page 16 Fold & Staple with Trimming (Finisher FS-611 with Trimmer Unit TU-502) Folds and staples printed sheets in the center to make a booklet. Use Trim- ming to trim the end of booklets. Contents-12 VarioLink 9522...
Page 17 Job List Displays the Job List Screen to view the output/send history of jobs, to check incomplete/suspended jobs, and to manage spool/reserved jobs. Manual Finishing (Finisher FS-528/FS-611 with Post Inserter PI-506) Manually staples/punches/folds paper sets without printing. VarioLink 9522 Contents-13...
Page 18 Enhances photo image in Photo mode, regular image in Text/Photo mode, text image in Text mode, lighter image in Dot Matrix mode. Overlay Scans an original image and overlays it on all pages of another document subsequently scanned or previously stored. Contents-14 VarioLink 9522...
Page 19 [Image Rotation Off] on the Copy Screen. Simplex/Duplex Selects the desired simplex mode (1-1 or 2-1); or duplex mode (1-2 or 2-2). Single Feed Sets the document feeder to accept thick originals or paste-ups to be fed one sheet at a time. VarioLink 9522 Contents-15...
Page 20 This feature sets the document feeder to accept z-folded originals. Zoom Selects fixed ratios, four reduction, four enlargement, and three preset ratios. Zoom ratios can be selected from 25% to 400% in 0.1% increments. Vertical and horizontal dimensions can be reduced or enlarged independently. Contents-16 VarioLink 9522...
Page 21: Composition Of User's Guide
User’s Guide - Printer This guide describes the operation of the printer function equipped for the machine. Please refer to this guide for how to use PCL driver, Adobe PS driver and Web Connection in user mode. VarioLink 9522 Contents-17...
Page 22 Please refer to this guide for how to use Plug-in driver in user mode. To operate safely, be sure to read “Section 1: Precautions for Installation and Use” in User’s Guide - Copier before using the machine. Contents-18 VarioLink 9522...
Page 23: Legal Restrictions On Copying
This machine also provides the forgery prevention function in order to pre- vent financial instruments from being copied illegally. We appreciate your understanding that the copied image may have some noise due to this forgery prevention function. VarioLink 9522 Contents-19...
Page 25: Precautions For Installation And Use
Precautions for Installation and Use...
Page 27: Safety Information
This symbol warns against cause burns. A diagonal line indicates a prohibited course of action. This symbol warns against dismantling the device. A solid circle indicates an imperative course of action. This symbol indicates you must unplug the device. VarioLink 9522...
Page 28 Should any of these conditions be found, im- mediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. VarioLink 9522...
Page 29 Overload could result in a fire. CAUTION • The outlet must be near the equipment and easily accessible. Otherwise you can not pull out the power plug when an emergency occurs. VarioLink 9522...
Page 30 Dust that accumu- lates between the plug terminals may cause a fire. Grounding WARNING • Connect the power cord to an electrical outlet that is equipped with a grounding terminal. VarioLink 9522...
Page 31 • Do not let any object plug the ventilation holes of this product. Heat could accumulate inside the product, resulting in a fire or malfunction. • Do not use flammable sprays, liquids, or gases near this product, as a fire could result. VarioLink 9522...
Page 32 When checking the inside of the unit for mal- functions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a “Caution HOT” cau- tion label. VarioLink 9522...
Page 33 If the unit falls it may cause severe personal injury. The product may also be damaged or malfunction. Before successive holidays CAUTION • Unplug the product when you will not use the product for long periods of time. VarioLink 9522...
Page 34: Regulation Notices
Om apparaten används på annat sätt än I denna bruksanvisning specificer- ats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1. Det här är en halvledarlaser. Den maximala effekten för laserdioden är 15 mW och våglängden är 775–800 nm. 1-10 VarioLink 9522...
Page 35 This device must be used with a shielded network cable and shielded USB interface cable. The use of non-shielded cables is likely to result in interfer- ence with radio communications and is prohibited under 89/336/EEC rules. VarioLink 9522 1-11...
Page 36 WARNING: The design and production of this unit conform to FCC regula- tions, and any changes or modifications must be registered with the FCC and are subject to FCC control. Any changes made by the purchaser or user 1-12 VarioLink 9522...
Page 37 This device must be used with a shielded network (10 Base-T/100 Base-TX) cable and a shielded parallel cable. The use of non-shielded cables is likely to result in interference with radio communications and is prohibited under CISPR rules and local rules. VarioLink 9522 1-13...
Page 38: Caution Labels And Indicators
DO NOT put your hand between Class IIIb Laser Diode that the main body and developing emits an invisible laser fixing unit; otherwise you may be beam. The cover should injured. not be opened under any circumstances. 1-14 VarioLink 9522...
Page 39 Be sure to hold both sides of the printed sheets when removing them, and DO NOT leave your hand on the printed sheets while the primary (main) tray goes up. FS-528 FS-611 VarioLink 9522 1-15...
Page 40 Do not remove caution labels, Should any caution label or caution indi- cator be illegible due to soilage, clean the label. If any caution label is re- moved or cleaning does not vender the label legible, please contact your service representative. 1-16 VarioLink 9522...
Page 41: Installation Space
(150) 26.6 37.4 30.7(780) 38.6 (200) (675) (950) (980) 55.9 (1420) 63.1 47.4 (1603) (1203) 39.0 (990) 27.2 (690) 16.1 17.1 33.1 76.0 (410) (840) (435) (1930) 81.4 (2066) 93.2 (2366) Main Body + FS-611 + LU-407 VarioLink 9522 1-17...
Page 42 (980) (400) 63.1 (1603) 55.9 (1420) 47.4 (1203) 27.4 22.1 (695) (562) 16.1 33.1 26.4 50.4(1280) (410) (840) (670) 132.7 (3369) 144.5 (3669) Main Body + FS-611 + PI-506 + ZU-607 + LU-408 + MK-721 + TU-502 1-18 VarioLink 9522...
Page 43 (1603) 55.9 (1420) 47.4 (1203) 27.4 22.1 (695) (562) 16.1 12.0 33.1 26.4 50.4 (840) (410) (305) (1280) (670) 138.0 (3505) 149.8 (3805) Main Body + FS-611 + PI-506 + GP-501 + LU-408 + MK-721 + TU-502 VarioLink 9522 1-19...
Page 44: Operation Precautions
- Copies that are to be kept for a long time should be stored where they are not exposed to light or high temperature in order to prevent them from fading or sticking together. - Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies. 1-20 VarioLink 9522...
Page 45 Finisher tray of Finisher FS-528/FS-611 gradually goes down while printed materials output. DO NOT allow any object to interfere with the operation of the tray on the left side of the finisher, as any interference may cause damage to the finisher. VarioLink 9522 1-21...
Page 47: Preparation For Use
Preparation for Use...
Page 49: Machine Configuration
Preparation for Use Preparation for Use Machine Configuration External machine items VarioLink 9522...
Page 50 With optional Punch Kit PK-505 installed, Punch mode is also available. Trimmer Unit TU-502 (option) Trims the end of booklet. Post Inserter PI-506 (option) Used together with FS-528/FS-611, loads cover sheet paper to feed it as cover, and enables to use the finisher manually. VarioLink 9522...
Page 51 Fixing unit Fuses the toner onto paper. Main power switch Used only by service representative turns machine power on/off when pressed. 7 CAUTION The internal fixing unit is very hot. To avoid getting burned, DO NOT TOUCH. VarioLink 9522...
Page 52: Control Panel Layout
[Stop] key Ceases the copying sequence; deletes the stored memo- [Proof Copy] key Prints a single set of sample copy to check whether the current settings are specified properly. [Start] key Activates various machine operations. VarioLink 9522...
Page 53 7 CAUTION The touch panel is covered with glass. Do not drop heavy objects on the glass, or put excess weight or pres- sure on it; otherwise the glass may break or scratched and you may be injured. VarioLink 9522...
Page 54 Touched to set the reduction ratio slightly smaller than full size (0.930) and to center the copy image. [Auto Zoom] key Touched to activate the Auto Zoom mode. Set Number indicator Indicates the print quantity entered from the control panel keypad. VarioLink 9522...
Page 55 3 to 5 icons are required. For 6 or more icons, only the icons will be displayed without letters. Message area Displays the machine status and procedure required at that time. VarioLink 9522...
Page 56: Machine Status Screen
Job list Displays the current status of the jobs to be operated on the machine. Orig. counter of current job Indicates the original count of printing job in progress. 2-10 VarioLink 9522...
Page 57 3 to 5 icons are required. For 6 or more icons, only the icons will be displayed without letters. Message area Displays messages concerning toner supply, preventive maintenance, output jobs, and so on. VarioLink 9522 2-11...
Page 58 Preparation for Use Large Capacity Unit LU-407/LU-408 Large Capacity Unit LU-407 Large Capacity Unit LU-408 2-12 VarioLink 9522...
Page 59 Can be turned to move or fix the rear stopper. Rear stopper Fixes the rear end of paper. Bottom plate Goes up automatically when paper supply becomes low, and goes down when the paper loading button is pressed. VarioLink 9522 2-13...
Page 60 Preparation for Use Finisher FS-528/FS-611 (+ Punch Kit PK-505) Finisher FS-528 Finisher FS-611 2-14 VarioLink 9522...
Page 61 The primary (main) tray gradually goes down while printed materials out- put. DO NOT allow any object to interfere with the operation of the tray on the left side of the finisher, as any interference may cause damage to the finisher. VarioLink 9522 2-15...
Page 62 Preparation for Use Finisher FS-528 + Punch Kit PK-505 Finisher FS-611 + Punch Kit PK-505 2-16 VarioLink 9522...
Page 63 Holds stapler, and FS-611 also holds the device to pro- vide Multi Half Fold, Fold & Staple, and Multi Tri-Fold modes. Cartridge housing Holds staple cartridge and to be removed from the stacker unit when replenishing staples. VarioLink 9522 2-17...
Page 64 Hold cover sheets to fix the position. Cover sheet feeder (upper) Holds cover sheets. Cover sheet feeder (lower) Holds cover sheets to be used for manual opera- tion. Lower tray paper guides Hold cover sheets to fix the position. 2-18 VarioLink 9522...
Page 65 Can be withdrawn to allow removal of mishandled paper. Lever (FN 6) Opens to allow removal of mishandled paper. Outlet lever (FN 8) Opens to allow removal of mishandled paper. Scrap box Holds punch scraps and withdrawn for removal of punch scraps. VarioLink 9522 2-19...
Page 66 Excessive weight applied to the inside or outside of the trimmer stacker will damage the equipment. DO NOT use the stacker for storage. The tray inside the stacker slides to the left while finished sets are delivered; impeding the movement may cause an unexpected trouble. 2-20 VarioLink 9522...
Page 67 Can be turned to ease removal of mishandled pa- per. Scrap box Holds trim scraps cut off from the booklets and withdrawn for removal of trim scraps. Trimmer pressure release lever Opens to allow removal of mishandled paper. VarioLink 9522 2-21...
Page 68 Preparation for Use Multi Punch GP-501 2-22 VarioLink 9522...
Page 69 GP4. Lever GP6 Opens to the upper-left for removal of mishandled paper. Knob GP8 Turned for removal of mishandled paper. Die set Punches various types of file holes. VarioLink 9522 2-23...
Page 70 PostScript Kit PS-504 Staple Kit SK-701 Finisher FS-528 Main body Large Capacity Unit LU-407 Staple Kit MS-5C Toner Recycle Cut Kit RC-501 Finisher FS-611 Large Capacity Z Folding Unit ZU-607 Unit LU-408 Mounting Kit MK-721 Trimmer Unit TU-502 2-24 VarioLink 9522...
Page 71: Turning On/Off The Power Switch
Turn ON the sub power switch. – The sub power switch is located on the right side of the control panel. When the sub power switch is turned on, the Power LED on the control panel will turn blue. VarioLink 9522 2-25...
Page 72 See page 8-15 for details. For details on making authentication, see page 2-35 for details. For details on selecting the screen to be displayed after the machine power is on, see POD Administrator’s Reference. 2-26 VarioLink 9522...
Page 73 Reminder When turning the main power switch off then on, be sure to wait 10 sec- onds or longer before turning it on again; otherwise the machine may not operate properly. VarioLink 9522 2-27...
Page 74: Automatically Resetting The Copy Conditions: Auto Reset Setting
For selecting the timespan to activate Auto Reset Setting, see POD Ad- ministrator’s Reference. For selecting either Full Auto or Initial Setting, see POD Administrator’s Reference. For changing Output Setting of Full Auto, see POD Administrator’s Ref- erence. 2-28 VarioLink 9522...
Page 75: To Use Machine When Power Save Led Lights
Timer Interrupt function. See page 2-33 for details. Detail The Power Save function has two modes: Auto Low Power and Auto Shut Off. See the following description for details. This function can also be activated manually. For details, see page 2-32. VarioLink 9522 2-29...
Page 76: Automatically Conserving Energy: Auto Low Power
10 minutes/ 15 minutes/ 30 minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240 minutes. See POD Administrator’s Reference for details. To exit Auto Low Power Press or touch any key on the control panel and touch panel. 2-30 VarioLink 9522...
Page 77: Automatically Conserving Energy: Auto Shut Off
The Auto Shut Off can be set for OFF/ 1 minute/ 3 minutes/ 5 minutes/ 15 minutes/ 30 minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240 minutes, or can be deactivated. For details, see POD Administrator’s Reference. To exit Auto Shut Off Press [Power Save]. The copying operation will become available. VarioLink 9522 2-31...
Page 78: Manually Conserving Energy
Shut off mode Keep POWER SAVER pressed more than one second to enter Low power mode Detail The machine is initially set to activate the Shut Off function manually. To use Low Power instead, see POD Administrator’s Reference. 2-32 VarioLink 9522...
Page 79: Limiting Machine Usage: Weekly Timer
The machine power will be turned off automatically after 5 minutes from this state if a password is not entered. Or, if the following message is displayed, proceed to step 3. Please specify desired copy time hour(s) minute(s) VarioLink 9522 2-33...
Page 80 Input desired copy time 3 hour(s) 07 minute(s) Copying is available until the set time is up. When the machine operation is finished, press [Power Save] for one second or longer, then release it. The machine returns to OFF condition. 2-34 VarioLink 9522...
Page 81: Making User Authentication
Copy quantity limit for each section can also be set. When the machine is turned on, one of the following User Authentication Screens will be displayed according to the authentication setting. Copying will be available by the following procedure. VarioLink 9522 2-35...
Page 82 When machine operation is completed, press [Access]. The initial state will be restored, with the User Authentication Screen displayed on the touch panel. Note If the message “Copy limit reached” is displayed and machine operation becomes unavailable, contact your administrator. 2-36 VarioLink 9522...
Page 83: Paper And Original Information
Paper and Original Information...
Page 85: Paper Information
Screen, see page 9-39. As to the Paper Setting from the Machine Status Screen, see POD Administrator’s Reference. Selecting [Emboss] as paper type for trays 1 to 4 and bypass tray, available setting range will be limited to 14 to 57 lb for all trays. VarioLink 9522...
Page 86 18 to 21 lb (max. 20 sheets or 19 sheets can be trimmed with a cover sheet (53 lb) attached.) 22 to 28 lb (max. 16 sheets or 15 sheets can be trimmed with a cover sheet (53 lb) attached.) VarioLink 9522...
Page 87: Paper Tray/ Exit Tray Capacity
Fold & Staple: 5 sets for 20-sheet-folded booklet (100 sheets, 400 pages) Max. folded sheets in Multi Tri-Fold: 3 sheets (17 to 21 lb Bond) / 1 sheet (22 to 28 lb Bond) Multi Tri-Fold: 50 sets for 1-sheet-folded set VarioLink 9522...
Page 88 Paper size/ 8.5"×11"w/v, 5.5"×8.5"v (B4w, A4w/v, 11"×17"w (A3w) Number of stapled B5v, A5v) sheets 2 ~ 9 100 sets 50 sets 10 ~ 20 21 ~ 30 31 ~ 40 41 ~ 50 51 ~ 60 61 ~ 100 VarioLink 9522...
Page 89 Available sheet count in one stapled set Primary (Main) tray capacity Z-folded sheets Regular sheets 1 sheet 1 ~ 40 sheets 20 stapled sets 2 sheets 0 ~ 30 0 ~ 20 0 ~ 10 6 or more Staple is unavailable with Z-Fold. VarioLink 9522...
Page 90: Paper Size
11" × 17"T w, 8.5" × 11"T w/v, 5.5" × 8.5"T v, A3T w, B4T w, A4T w/v, B5T w/v, A5T v Tab Paper (Custom Size) Max. 12.36" × 17.52" (314 mm × 445 mm) to min. 7.17" × 5.51" (182 mm × 140 mm) VarioLink 9522...
Page 91 Tab Paper 11" × 17"T w, 8.5" × 11"T w/v, A3T w, B4T w, A4T w/v Tab Paper (Custom Size) Max. 12.36" × 18.11" (314 mm × 460 mm) to min. 7.68" ×7.99" (195 mm × 203 mm) VarioLink 9522...
Page 92 11" × 17"T w, 8.5" × 11"T w/v, 5.5" × 8.5"T v, A3T w, B4T w, A4T w/v, B5T w/v, A5T v Tab Paper (Custom Size) Max. 12.36" × 17.52" (314 mm × 445 mm) to min. 7.17" ×5.51" (182 mm × 140 mm) 3-10 VarioLink 9522...
Page 93 11" × 17"T w, 8.5" × 11"T w/v, 5.5" × 8.5"T v, A3T w, B4T w, A4T w/v, B5T w/v, A5T v Tab Paper (Custom Size) Max. 13.03" × 17.63" (331 mm × 448 mm) to min. 3.94" ×5.83" (100 mm × 148 mm) VarioLink 9522 3-11...
Page 94 11" × 17" w, 8.5" × 14" w, 8.5" × 11" w, SRA4 w, A3 w, B4 w, A4 w Wide Paper 11" × 17"W w, 8.5" × 11"W w, SRA4W w, A3W w, B4W w, A4W w * Without Trimming selected, available sizes will be the same as those in Folding mode tray. 3-12 VarioLink 9522...
Page 95: Special Paper In Bypass Tray
Do not use paper with staples or paper that conducts electricity (silver, carbon, etc.) An accident may occur as a result of fire. Reminder To avoid machine trouble, do not use heat-sensitive paper, colored OHP transparencies, or paper specifically designed for ink-jet printer, such as photo-paper. VarioLink 9522 3-13...
Page 96: Auto Tray Switch Function
- Store paper in a cool, dry area. Using damp paper may cause a paper misfeed. - Keep partially used packages tightly wrapped during storage. - Do not place paper packages vertically to store. Paper curl due to the vertical storage may cause a paper misfeed. 3-14 VarioLink 9522...
Page 97: Original Information
Original thickness 1.2" (30 mm) or less Detail Detectable original size can be changed from Inch series to AB series, only A series, or AB series and Inch series mixed by the administrator. See POD Administrator’s Reference. VarioLink 9522 3-15...
Page 98: Adf Originals
Original size 5.0" × 5.5" to 11.7" × 17.0" (128 mm × 139.7 mm to 297 mm × 431.8 mm) Feeder capacity 100 sheets (21 lb Bond) Curling tolerance 10 mm or less Original placement Face up 3-16 VarioLink 9522...
Page 99 5.0" × 5.5" to 11.7" × 17.0" (128 mm × 139.7 mm to 297 mm × 431.8 mm) Feeder capacity 100 sheets (21 lb Bond) Curling tolerance 10 mm or less Original placement Face up; orientation same as copy paper VarioLink 9522 3-17...
Page 100 Original size 5.0" × 5.5" to 11.7" × 17.0" (128 mm × 139.7 mm to 297 mm × 431.8 mm) Feeder capacity 1 sheet at a time Curling tolerance 10 mm or less Original placement Face up 3-18 VarioLink 9522...
Page 101: Supplies & Handling
Supplies & Handling...
Page 103: Loading Paper
Paper setting for each tray can be made from the Machine Status Screen or from the Copy Screen using the [Paper Setting] key. Be sure to load the paper specified for the tray; otherwise mishandled pa- per may occur. VarioLink 9522...
Page 104: Loading Paper In Main Body Trays (Tray 1 To 3)
0 Only one tray can be withdrawn at a time. Withdraw the tray to be supplied with paper. – Withdraw the tray completely until it stops. Otherwise, the paper feed roller may not open or machine trouble may be caused. Open the paper feed roller. VarioLink 9522...
Page 105 Be sure that the side guide plates and rear guide are securely aligned to the paper; otherwise the machine cannot detect the correct paper size, or machine trouble may occur. Do not bump the tray into the main body; otherwise machine trouble may be caused. VarioLink 9522...
Page 106: Loading Paper In Bypass Tray
To avoid machine trouble, do not use coated paper as follows: Heat-sensitive paper, silver-coated or carbon-backed paper, ink-jet printer paper To load paper in bypass tray Open the bypass tray. – When loading large paper, withdraw the right edge of the bypass tray to extend it. VarioLink 9522...
Page 107 150 sheets or to the line indicated on the paper guides. The indicator " " on the Machine Status Screen and on the Copy Screen will change to " ". When copying is completed, close the bypass tray. VarioLink 9522...
Page 108: Loading Paper In Large Capacity Unit (Tray 4)
If changing the paper size, proceed to the next step. Remove the paper guide knob (lower). – Open the left side door. – Turn the paper guide knob (lower) counterclockwise to loosen it, then remove the knob. LU-408 LU-407 VarioLink 9522...
Page 109 Adjust the position of paper guides. – Turn the paper guide knobs (upper) (4 pieces) counterclockwise to loosen them. LU-407 LU-408 – Move the two paper guides to the appropriate positions according to the size indication. LU-408 LU-407 VarioLink 9522...
Page 110 Align the front edge of the bottom fixing plate of paper guides. – Insert the paper guide knob (lower) to the screw hole at fixing posi- tion, then turn the knob clockwise to fix it. LU-408 LU-407 4-10 VarioLink 9522...
Page 111 What if the screw hole previously used is unavailable after moving the paper guides? % Find another hole available to fix the knob. Adjust the position of rear stopper. – Turn the rear stopper knobs (2 pieces) counterclockwise to loosen them. LU-407 LU-408 VarioLink 9522 4-11...
Page 112 Move the position of the rear stopper to the appropriate position according to the size indication on the bottom plate. LU-408 LU-407 – Turn the two rear stopper knobs clockwise to fix the rear stopper. LU-407 LU-408 4-12 VarioLink 9522...
Page 113 Supplies & Handling Press the paper loading button. LU-408 LU-407 Load paper into the tray. LU-408 LU-407 VarioLink 9522 4-13...
Page 114 Do not load above the limit indicated on the paper guides. Be sure that the rear stopper is correctly positioned according to the pa- per size to be loaded; otherwise paper misfeed or machine trouble may occur. 4-14 VarioLink 9522...
Page 115: Loading Tabbed Sheets
Set paper aligning it to the paper feed roller side of the tray. – Press the release lever of the front side guide plate to move the side guide plates, and also move the rear guide to the edge of paper. VarioLink 9522 4-15...
Page 116: Loading Tabbed Sheets In Large Capacity Unit (Tray 4)
– Set paper aligning it to the paper feed roller side of the tray. – Move the paper guides and rear stopper to the edge of the paper. See page 4-8 for details. Close the top door. 4-16 VarioLink 9522...
Page 117 1st tabbed sheet. Needless Tab Paper Exit may not be allowed depending on the finisher type mounted on the machine. VarioLink 9522 4-17...
Page 118: Loading Tabbed Sheets In Bypass Tray
3 FINISHED SETS To load tabbed sheets in bypass tray Open the bypass tray. Specify a tab paper size for the bypass tray. – For details of size setting, see page 9-44. Load tabbed sheets as illustrated above. 4-18 VarioLink 9522...
Page 119: Adding Toner
Otherwise, machine trouble may be caused. 7 WARNING Precaution for empty toner bottles If thrown into a fire, toner may ignite and cause a dangerous situation. DO NOT THROW toner or empty toner bottles into a fire! VarioLink 9522 4-19...
Page 120 To exchange a toner bottle Open the machine front door, then pull out the toner unit 90 degrees to the right. Pull forward the lever on the left side of the toner unit until it stops. 4-20 VarioLink 9522...
Page 121 Set the new toner bottle into the toner unit, positioning the hollow part of the toner bottle on the top. – Be sure to set the hollow part of the toner bottle upward, otherwise the machine trouble may oc- cur. VarioLink 9522 4-21...
Page 122 Supplies & Handling Push the lever backward until it stops. Return the toner unit to its original position, then close the machine front door securely. 4-22 VarioLink 9522...
Page 123: Replenishing Staple Supply
When the staple cartridge of Finisher FS-528 becomes empty, the Cartridge indicator lights in orange in the maintenance & supply indicator area of the Machine Status Screen. Follow the procedure below to refill the cartridge with staples. To add staples Open the finisher door. VarioLink 9522 4-23...
Page 124 Supplies & Handling Pull out the stacker unit slowly by holding the stacker unit handle until it stops. Remove the staple cartridge. – Hold the knob of the staple cartridge, then pull it downward to re- move it. 4-24 VarioLink 9522...
Page 125 Open the cartridge cover, then set a staple roll into the cartridge. – Close the cartridge cover, then remove the lock tape while pulling it horizontally. Insert the staple cartridge as shown in the illustration, then push it up firmly to secure it in place. VarioLink 9522 4-25...
Page 126 Return the stacker unit to its original position. Close the finisher door. Reminder When removing lock tape from the staple roll, DO NOT pull it upward; otherwise the tape may be broken and remain inside the cartridge, so that copied sets cannot be stapled. 4-26 VarioLink 9522...
Page 127: Replenishing Staple Supply In Finisher Fs-611
When the staple cartridge of Finisher FS-611 becomes empty, the Cartridge indicator lights in orange in the maintenance & supply indicator area of the Machine Status Screen. Follow the procedure below to refill the cartridge with staples. To add staples Open the finisher door. VarioLink 9522 4-27...
Page 128 Pull out the stacker unit slowly by holding the stacker unit handle until it stops. Remove the staple cartridge. – Pull up the knob of the staple cartridge, then remove it while sliding it along the stapler rail. Remove the empty staple case from the staple cartridge. 4-28 VarioLink 9522...
Page 129 Insert the staple cartridge while sliding it along the stapler rail, then push down and in to secure it in place. Return the stacker unit to its original position. VarioLink 9522 4-29...
Page 130 Supplies & Handling Close the Finisher door. Reminder Do not remove the staples remaining inside the staple cartridge when re- filling it with new staples; otherwise the first sheet output after the replen- ishment will not be stapled. 4-30 VarioLink 9522...
Page 131: Emptying Scrap Box Of Punch Kit
When the scrap box of the punch kit becomes full, the Hole-Punch Scrap Box indicator lights in orange in the maintenance & supply indicator area of the Machine Status Screen. Follow the procedure below to empty the scrap box. To empty the scrap box Open the finisher door. VarioLink 9522 4-31...
Page 132 Supplies & Handling Withdraw the scrap box. Empty the scrap box. Return the scrap box to its original position, then close the finisher door securely. 4-32 VarioLink 9522...
Page 133: Emptying Scrap Box Of Z Folding Unit
Box indicator lights in orange in the maintenance & supply indicator area of the Machine Status Screen. Follow the procedure below to empty the scrap box. To empty the scrap box Open the z folding unit front door with the finisher door handle. VarioLink 9522 4-33...
Page 134 Supplies & Handling Withdraw the scrap box. Empty the scrap box. Return the scrap box to its original position, then close the z folding unit front door securely. 4-34 VarioLink 9522...
Page 135: Emptying Scrap Box Of Trimmer Unit
Status Screen. If it occurs during the machine operation, a message will be displayed on the Copy Screen. Follow the procedure below to empty the scrap box. To empty the scrap box Open the trimmer unit front door. VarioLink 9522 4-35...
Page 136 Supplies & Handling Withdraw the scrap box. Empty the scrap box. Return the scrap box to its original position, then close the trimmer unit front door securely. 4-36 VarioLink 9522...
Page 137: Emptying Scrap Box Of Multi Punch
Once withdrawing the scrap box, be sure to empty it even if a small amount of punch scraps collects in the box. Otherwise, punch scraps may overflow due to the delay in indicating the emptying operation. To empty the scrap box Open the multi punch door. VarioLink 9522 4-37...
Page 138 Supplies & Handling Withdraw the scrap box. Empty the scrap box. Return the scrap box to its original position, then close the multi punch door securely. 4-38 VarioLink 9522...
Page 139: Troubleshooting
Troubleshooting...
Page 141: If "Please Call Service C-####" Message Is Displayed
The message “Power off in progress Do not turn the main power off” appears. – Do not the main power off, while this message is displayed. Unplug the machine. Contact your service representative and report the condition and report code number. VarioLink 9522...
Page 142 (ex. Tray 2). 7 CAUTION Precaution for the limited use The machine should not keep operating by limited use for long time. Be sure to contact your service representative immediately when the Call for Service Screen is displayed. VarioLink 9522...
Page 143: Clearing Mishandled Paper
- If paper misfeed occurs in the feeding inlet/outlet of the main body, the lever M4 cannot be turned down rightward to draw out the fixing convey- ance unit. Never turn it down forcibly. - When removing mishandled paper, be sure to leave not torn paper inside the machine. VarioLink 9522...
Page 144 Service can set the machine to display jam codes in the message area of the Jam Position Screen. Contact your service representative, if desired. Touching [Illustration] on the Jam Position Screen will display an illustration and instructions for taking disposal action, with the message “Please remove paper following a guide/illustration”. VarioLink 9522...
Page 145 Troubleshooting If provided, touch [Next] to go to the next page of a series of illustrations. Touch [Jam Position] to return to the Jam Position Screen. VarioLink 9522...
Page 146 Troubleshooting Overview of jam position display Main body + Finisher FS-528 (option) Main body + Finisher FS-611 + Post Inserter PI-506 (option) Main body + Finisher FS-611 + Post Inserter PI-506 + Large Capacity Unit LU-407/LU-408 (option) VarioLink 9522...
Page 147 Main body + Z Folding Unit ZU-607 + Finisher FS-611 + Post Inserter PI-506 + Trimmer Unit TU-502 + Large Capacity Unit LU-407/LU-408 (option) Main body + Multi Punch GP-501 + Finisher FS-611 + Post Inserter PI-506 + Large Capacity Unit LU-407/LU-408 (option) VarioLink 9522...
Page 148 Finisher (sub tray/ post inserter) right side of main body Horizontal conveyance section of large Finisher (folding/stapling section) capacity unit Feeding inlet of main body Trimmer unit Drum unit Z folding unit Fixing unit/ ADU Multi punch 5-10 VarioLink 9522...
Page 149 [6] will flash in- stead. Open the front door of large capacity unit and vertical conveyance door to remove mishandled paper. Close the vertical conveyance door. Open the tray 1, and then re- load paper neatly. Close the tray 1. VarioLink 9522 5-11...
Page 150 [6] will flash in- stead. Open the front door of large capacity unit and vertical conveyance door to remove mishandled paper. Close the vertical conveyance door. Open the tray 2, and then re- load paper neatly. Close the tray 2. 5-12 VarioLink 9522...
Page 151 [6] will flash in- stead. Open the front door of large capacity unit and vertical conveyance door to remove mishandled paper. Close the vertical conveyance door. Open the tray 3, and then re- load paper neatly. Close the tray 3. VarioLink 9522 5-13...
Page 152 Flashing No. [4]: Mishandled paper in tray 4 Open the top door of large capacity unit, then reload pa- per neatly. Close the top door. Flashing No. [5]: Mishandled paper in bypass tray Reload paper neatly in the bypass tray. 5-14 VarioLink 9522...
Page 153 – When removing mishan- dled paper, be sure to leave no torn paper inside the machine. Close the vertical convey- ance door and front door of the large capacity unit. VarioLink 9522 5-15...
Page 154 Open the horizontal convey- ance guide lever to remove mishandled paper. – When removing mishan- dled paper, be sure to leave no torn paper inside the machine. Close the front door of the large capacity unit. 5-16 VarioLink 9522...
Page 155 (ADU cradle). – The conveyance fixing unit is heavy. Use care and pull it out gently; oth- erwise you may be in- jured or machine trouble may be caused. VarioLink 9522 5-17...
Page 156 Troubleshooting Open the lever M3 to remove mishandled paper. Open the lever M1 to remove mishandled paper. Open the lever M12 to re- move mishandled paper. 5-18 VarioLink 9522...
Page 157 The fixing area of the conveyance fixing unit (ADU cradle) is very hot. To avoid getting burned, DO NOT TOUCH. Be especially careful not to put your hand into the fixing area when opening the conveyance fixing unit to remove mishandled paper. VarioLink 9522 5-19...
Page 158 – The conveyance fixing unit is heavy. Use care and pull it out gently; oth- erwise you may be in- jured or machine trouble may be caused. Remove paper mishandled in the conveyance fixing unit (ADU cradle). 5-20 VarioLink 9522...
Page 159 The fixing area of the conveyance fixing unit (ADU cradle) is very hot. To avoid getting burned, DO NOT TOUCH. Be especially careful not to put your hand into the fixing area when opening the conveyance fixing unit to remove mishandled paper. VarioLink 9522 5-21...
Page 160 Use care and pull it out gently; oth- erwise you may be in- jured or machine trouble may be caused. Open the lever M8, then turn the knob M10 clockwise to remove mishandled paper. 5-22 VarioLink 9522...
Page 161 M4 counterclockwise to lock it. – The conveyance fixing unit is heavy. Use care and push it in gently; oth- erwise machine trouble may be caused. Close the front door and left side door of the main body. VarioLink 9522 5-23...
Page 162 (ADU cradle). – The conveyance fixing unit is heavy. Use care and pull it out gently; oth- erwise you may be in- jured or machine trouble may be caused. 5-24 VarioLink 9522...
Page 163 The fixing area of the conveyance fixing unit (ADU cradle) is very hot. To avoid getting burned, DO NOT TOUCH. Be especially careful not to put your hand into the fixing area when opening the conveyance fixing unit to remove mishandled paper. VarioLink 9522 5-25...
Page 164 (ADU cradle). – The conveyance fixing unit is heavy. Use care and pull it out gently; oth- erwise you may be in- jured or machine trouble may be caused. Open the lever M11 to re- move mishandled paper. 5-26 VarioLink 9522...
Page 165 The fixing area of the conveyance fixing unit (ADU cradle) is very hot. To avoid getting burned, DO NOT TOUCH. Be especially careful not to put your hand into the fixing area when opening the conveyance fixing unit to remove mishandled paper. VarioLink 9522 5-27...
Page 166 Troubleshooting Flashing No. [13]: Mishandled paper in Finisher FS-528 Remove paper on the prima- ry (main) tray and secondary (sub) tray, if any. Open the finisher door. Turn down the lever FN2 to remove mishandled paper. 5-28 VarioLink 9522...
Page 167 FN3 both clockwise and counter- clockwise to remove mishan- dled paper. Open the lever FN5 to the left, then turn the knob FN3 both clockwise and counter- clockwise to remove mishan- dled paper. VarioLink 9522 5-29...
Page 168 Holding the lever FN7, pull out the stacker unit. Remove mishandled paper in the stacker unit adjustment plate. 5-30 VarioLink 9522...
Page 169 Close the finisher door. Flashing No. [13]: Mishandled paper in Finisher FS-611 Remove paper on the prima- ry (main) tray and secondary (sub) tray, if any. Open the finisher door. VarioLink 9522 5-31...
Page 170 607, open the lever FN6 of z folding unit rightward to check for mishandled paper. Remove it, if any. Open the lever FN4 to the right, then turn the knob FN3 both clockwise and counter- clockwise to remove mishan- dled paper. 5-32 VarioLink 9522...
Page 171 Holding the lever FN6, pull out the stacker unit. Open the lever FN9 to the left to remove mishandled paper. VarioLink 9522 5-33...
Page 172 Troubleshooting Holding the lever FN6, return the stacker unit to its original position. – Use care to push in the stacker unit gently; other- wise machine trouble may be caused. Close the finisher door. 5-34 VarioLink 9522...
Page 173 Open the conveyance guide lever to the right, then turn the release knob both clock- wise and counterclockwise to remove mishandled paper. Return the conveyance guide lever to its original position, then close the ADF cover. VarioLink 9522 5-35...
Page 174 Raise the ADF, then open the document pad to remove mishandled paper. Close the ADF, then open the feeding tray to the left to re- move mishandled paper. Open the delivering tray to the right to remove mishan- dled paper. 5-36 VarioLink 9522...
Page 175 Flashing No. [17]: Mishandled paper in secondary (sub) tray of Finisher FS-528 Open the finisher door. Open the lever FN4 to the right, then turn the knob FN3 both clockwise and counter- clockwise to remove mishan- dled paper. Close the finisher door. VarioLink 9522 5-37...
Page 176 Flashing No. [17]: Mishandled paper in secondary (sub) tray of Finisher FS-611 Open the finisher door. Open the lever FN4 to the right, then turn the knob FN3 both clockwise and counter- clockwise to remove mishan- dled paper. Close the finisher door. 5-38 VarioLink 9522...
Page 177 Flashing No. [17]: Mishandled paper in post inserter Remove paper on the up- per/lower tray of post insert- er, if any. Holding the top cover switching lever, open the top cover to the left. Remove mishandled paper. VarioLink 9522 5-39...
Page 178 Troubleshooting Return the top cover to its original position. Open the finisher door. Open the lever FN1 to the left to remove mishandled paper. Finisher FS-528 Finisher FS-611 Close the finisher door. 5-40 VarioLink 9522...
Page 179 – Be sure to perform this operation before pulling out the stacker unit; oth- erwise torn paper may be left inside the machine. Holding the lever FN6, pull out the stacker unit. VarioLink 9522 5-41...
Page 180 Open the lever FN10 to the upper left to remove mishan- dled paper. – If the machine is installed with trimmer unit, open the front door and front- right cover of the trimmer unit, then remove mis- handled paper. 5-42 VarioLink 9522...
Page 181 Troubleshooting Holding the lever FN6, return the stacker unit to its original position. – Use care to push in the stacker unit gently; other- wise machine trouble may be caused. Close the finisher door. VarioLink 9522 5-43...
Page 182 Troubleshooting Flashing No. [19]: Mishandled paper in trimmer unit Open the front door of the trimmer unit. Open the front-right cover of the trimmer unit. Turn the trimmer unit knob counterclockwise to remove mishandled paper. 5-44 VarioLink 9522...
Page 183 Troubleshooting Open the trimmer pressure release lever upward to re- move mishandled paper. Return the trimmer pressure release lever to its original position. Close the front-right cover, then close the front door of the trimmer unit. VarioLink 9522 5-45...
Page 184 Flashing No. [20]: Mishandled paper in Z folding unit Open the front door of the Z folding unit. Open the lever FN1 to the upper right to remove mis- handled paper. Return the lever FN1 to its original position. 5-46 VarioLink 9522...
Page 185 Open the lever FN8 to the lower right to remove mis- handled paper. – Also open the finisher le- ver FN2 (on the left side) downward to remove mishandled paper. Finisher FS-528 Finisher FS-611 Holding the lever FN2, pull out the unit. VarioLink 9522 5-47...
Page 186 Troubleshooting Open the lever FN3 down- ward, then turn the knob FN4 counterclockwise, the knob FN5 clockwise to remove mishandled paper. Open the lever FN6 down- ward to remove mishandled paper. Remove mishandled paper. 5-48 VarioLink 9522...
Page 187 Open the lever FN7 upward to remove mishandled paper. Return the lever FN6 to its original position. Holding the lever FN2, return the unit to its original posi- tion. Close the front door of the z folding unit. VarioLink 9522 5-49...
Page 188 Flashing No. [21]: Mishandled paper in Multi Punch GP-501 Open the multi punch front door. Open the lever GP1 upward to remove mishandled paper. Open the lever GP2 right- ward, then turn the knob GP3 clockwise to remove mishan- dled paper. 5-50 VarioLink 9522...
Page 189 Open the lever GP5 down- ward to remove mishandled paper. Turn the knob GP7 counter- clockwise to remove mishan- dled paper. – When completed with re- moving mishandled pa- per, return the lever GP5 to its original position. VarioLink 9522 5-51...
Page 190 GP7 clockwise, and also turn the knob GP8 counterclockwise to remove mishandled paper. – When completed with re- moving mishandled pa- per, return the lever GP6 to its original position. Close the multi punch front door. 5-52 VarioLink 9522...
Page 191: If Burrs Remain In Punch Holes Using Multi Punch Gp-501
If burrs still remain in punch holes after the lubrication, apply grease to the positions illustrated below. Reminder Never use the grease on the general market. For the grease to be used in this procedure, please contact your service representative. VarioLink 9522 5-53...
Page 192: If [Machine] Tab Flashes In Orange
[MACHINE] tab may flash in orange. If touching [Detail Check] displays the Jam Position Screen, follow the pro- cedure on page 5-5 to remove mishandled paper. 5-54 VarioLink 9522...
Page 193: Tray Empty
To change the tray selection Touch the desired tray key. Touch [OK] to restore the Machine Status Screen. Press [Start] on the control panel. Paper will be delivered from newly selected tray to continue the printing operation. VarioLink 9522 5-55...
Page 194: Inconformity In Paper Setting
Follow the procedure for each to continue the machine operation. Using paper in different condition or another size in Custom/Wide Pa- per/Tab Paper (standard): Replace paper in the tray with that specified in paper setting, then touch [Change]. Press [Start] to restart the printing operation. 5-56 VarioLink 9522...
Page 195 Troubleshooting Note If wrong size is loaded in the tray, the following popup menu will be dis- played. Replace with the correct size, then touch [Close]. VarioLink 9522 5-57...
Page 196: If "Memory Full" Message Is Displayed: Memory Overflow
To give up further scanning but print out all the data already scanned into memory, touch [Stop Scan]. In this case, check the output sheets when printing is completed, and then reload the original to continue the job. 5-58 VarioLink 9522...
Page 197 To print out all the data already scanned for the reserve job, and continue scanning as the current job gradually enables memory for new data, touch [Continue]. – When selecting [Stop Scan] or [Continue], check the output sheets and then reload the original to continue the job. VarioLink 9522 5-59...
Page 198 Troubleshooting Press [Start] on the control panel. – The machine starts scanning for the reloaded original to complete the job. Note If the job settings include Booklet, the [Stop Scan] key will not appear. 5-60 VarioLink 9522...
Page 199: If Power Off/On Screen Is Displayed
When any trouble affects the electrical signal of the copier, the message “Please switch Off/On” will be displayed in the message area. Follow the procedure below to turn the machine power off then on. To turn off/on the power Turn OFF the sub power switch. VarioLink 9522 5-61...
Page 200 Do not turn the main power off” appears. – Do not the main power off, while this message is displayed. Wait about 10 seconds or longer. Turn ON the main power switch and sub power switch. 5-62 VarioLink 9522...
Page 201: If No Response Screen Is Displayed
When any trouble occurs on the printer board, “No Response from Control- ler” message will be displayed on the touch panel. Follow the procedure below to turn the machine power off then on. To turn off/on the power Turn OFF the sub power switch. VarioLink 9522 5-63...
Page 202 Do not turn the main power off” appears. – Do not the main power off, while this message is displayed. Wait about 10 seconds or longer. Turn ON the main power switch and sub power switch. 5-64 VarioLink 9522...
Page 203: Troubleshooting Tips
Is any mishandled paper left? Check copier diagram on touch pan- resume after mishan- el for additional indications of mis- dled paper is removed. handled paper. Duplex modes cannot Is ADF open? Fully close ADF. be selected. VarioLink 9522 5-65...
Page 204 Empty the scrap box. ies cannot be punched. Box indicator light on the Ma- chine Status Screen? Copies cannot be sta- Is copy paper excessively Reload the paper upside down into pled in position. curled? the tray. 5-66 VarioLink 9522...
Page 205 Using Trimming mode, Does the Trim Scrap Box in- Empty the scrap box. copies cannot be dicator light on the Machine trimmed. Status Screen? Reminder If remedies mentioned above do not work, contact your service repre- sentative. VarioLink 9522 5-67...
Page 207: Maintenance
Maintenance...
Page 209: Cleaning Image Scanning Section
Keep the ADF scanning glass clean; otherwise soil marks may be copied, re- sulting in dark lines on the copies. Raise the document feeder, then clean the glass with a clean soft cloth. Reminder Never use paint solvents, such as benzine or thinners, to clean the ADF scanning glass. VarioLink 9522...
Page 210 Raise the document feeder, then clean the ADF guide cover with a clean soft cloth. Reminder Never use paint solvents, such as benzine or thinners, to clean the origi- nal glass and ADF guide cover. VarioLink 9522...
Page 211: Checking Copy Count
For details, please contact your service repre- sentative. Detail The developer counter and OPC drum counter can be specified to indi- cate the cycle count and runtime count. Contact your service represent- ative, if desired. VarioLink 9522...
Page 212 Press [Utility/Counter] on the control panel. The Utility Screen will be displayed. The counter information will be displayed on the left side of the screen. Do you want to exit Utility mode and return to the previous screen? % Touch [Exit]. VarioLink 9522...
Page 213 Touch [COPY] tab to display the Copy Screen. Select the desired paper size, then press [Start]. After the counter list is printed out, the Utility mode will be released au- tomatically and the previous screen will be restored. VarioLink 9522...
Page 214: Preventive Maintenance
The administrator can call for service using the Utility setting. See POD Administrator’s Reference. In this case, you don’t have to make a call for preventive maintenance, because your machine has been monitored automatically by your service representative. VarioLink 9522...
Page 215: Specifications
Specifications...
Page 217: Main Body
Specifications Specifications Main Body Specifications 7.1.1 Main Body Specifications Name VarioLink 9522 Type Console type Copying system Laser electrostatic transfer method (dual beam) Original glass Stationary Photoconductor Light source Xenon lamp Developing method Dry-type dual-component reverse magnetic brush developing Fixing method...
Page 218: Adf
Document insertion Automatic feed Weight Approx. 22 kg Dimensions 650 (W) × 570 (D) × 170 (H) mm Power source Supplied from main body *: Detectable in landscape orientation (w) only These specifications are subject to change without notice. VarioLink 9522...
Page 219: Option Specifications
410 (W)* × 656 (D) × 990 (H) mm Weight Approx. 59 kg Power source Supplied from main body *: Effective size (width including Primary (main) tray) will be 688 mm/ 825 mm (with the tray edge extended). VarioLink 9522...
Page 220: Finisher Fs-611
410 (W)* × 656 (D) × 990 (H) mm Weight Approx. 68 kg Power source Supplied from main body *: Effective size (width including primary (main) tray) will be 675 mm/ 791 mm (with the tray edge extended). VarioLink 9522...
Page 221: Punch Kit Pk-505
Cover sheet sizes See page 3-10 for details. Stack capacity 200 sheets max. or 30 mm thick or less Dimensions 511 mm (W) × 620 mm (D) × 220 mm (H) Weight Approx. 10.5 kg Power source Supplied from finisher VarioLink 9522...
Page 222: Large Capacity Unit Lu-407
See page 3-9 for details. Paper types 11 to 80 lb With paper type specified as Embossed: 14 to 57 lb Dimensions 670 (W) × 639 (D) × 695 (H) mm Weight Approx. 42 kg Power source Supplied from main body VarioLink 9522...
Page 223: Z Folding Unit Zu-607
Can be trimmed with a sheet of 53 lb cover paper Paper sizes See page 3-12 for details. Dimensions 1,144 (W) × 610 (D) × 562 (H) mm Weight Approx. 68 kg Power source Supplied from an outlet VarioLink 9522...
Page 224: Multi Punch Gp-501 (Die Set Ds-501 To 506)
Approx. 270 lbs. (123 kg) Accessories: - PostScript Kit PS-504 - Mount Kit MK-721 - Mount Kit MK-724 - Staple Kit SK-701 - Staple Kit MS-5C - Toner Recycle Cut Kit RC-501 These specifications are subject to change without notice. 7-10 VarioLink 9522...
Page 225: Before Making Copies
Before Making Copies...
Page 227: How To Make A Basic Copy
When using a specific function, be sure to follow the procedure described in each section. To make a basic copy Position the original. – For detailed information on positioning the original, see page 8-8. VarioLink 9522...
Page 228 The function keys provided on the Copy Screen allow you to assign up to five job settings previously stored using Mode Memory, so that the most frequently used settings can be recalled on the screen with a single touch of the key. VarioLink 9522...
Page 229 For detailed information on setting print quantity, see page 8-13. Entered quantity will be displayed on the touch panel. Press [Start] on the control panel. – When the machine starts scanning the original, a popup menu will appear to inform you of the current job status. VarioLink 9522...
Page 230 The screen to be displayed after machine power is turned on can be se- lected from the Machine Status Screen (factory default), the Copy Screen or the Job List Screen. The popup menu varies depending on this selec- tion. VarioLink 9522...
Page 231 Machine can be set to use Dark Tone Control function, that is, to slow down the copying speed automatically in order to maintain the copy quality, which may deteriorate while making 20–30 copies of a dark orig- inal. For details, see POD Administrator’s Reference. VarioLink 9522...
Page 232: Positioning The Original
ADF. – Set the original in the same direction as that of the original direction icon displayed on the Copy Screen. – Up to 100 sheets of the original can be set at a time. Adjust paper guides. VarioLink 9522...
Page 233 Place mixed size originals aligned with the left rear side of the document feeder tray. – Set the original in the same direction as that of the original direction icon displayed on the Copy Screen. – Up to 100 sheets of the original can be set at a time. VarioLink 9522...
Page 234 Once closed, do not open the document feeder, otherwise the selected copy conditions may be altered automatically. Detail To use the Mixed mode, see procedure on page 9-7. For available combinations of mixed original sizes, see page 3-17. 8-10 VarioLink 9522...
Page 235 Once closed, do not open the document feeder, otherwise the selected copy conditions may be altered automatically. Detail To use the Z-Folded Original mode, see procedure on page 9-9. For available original sizes in Z-Folded Original mode, see page 3-17. VarioLink 9522 8-11...
Page 236: Positioning The Original On Original Glass
Set originals in the same direction as that of the original set direction icon on the screen; otherwise the copy result may not be satisfactory, espe- cially when using duplex mode, Staple, Fold & Staple, Multi Half or Book- let. See page 9-3 for details. 8-12 VarioLink 9522...
Page 237: Setting Print Quantity
The machine is initially set to copy the original set in amounts determined by the print quantity setting, then output sorted sets. Enter the desired print quantity from the control panel keypad. Entered quantity will be displayed on the touch panel. VarioLink 9522 8-13...
Page 238 Follow the procedure below to change the print quantity that has been al- ready entered. Press [C] (clear quantity). The quantity displayed on the touch panel will return to 0001. Enter the correct quantity from the control panel keypad. Entered quantity will be displayed on the touch panel. 8-14 VarioLink 9522...
Page 239: Setting Job During Warmup
Position the original FACE UP in the ADF or FACE DOWN on the orig- inal glass. – For details on positioning the original, see page 8-8. Press [Start]. – When scanning the original for the job is started, a popup menu will appear on the Copy Screen. VarioLink 9522 8-15...
Page 240 If [No] is touched, the Machine Status Screen or the Job List Screen will be restored. The current job will be displayed in the job list, with the count/set quan- tity indicated at the upper right corner of the screen. 8-16 VarioLink 9522...
Page 241 The Job List Screen is provided to change the operation order of reserve jobs, or to cancel unused reserve jobs. See page 12-3 for details. To suspend the job in progress, press [Stop]. For details, see "To Stop Scanning/Printing" on page 8-18. VarioLink 9522 8-17...
Page 242: To Stop Scanning/Printing
The current machine operation of the selected job will be suspended, and the popup menu will be displayed on the Copy Screen. Touch the desired key on the popup menu. – The popup menu will vary according to the job in progress. 8-18 VarioLink 9522...
Page 243 Touching [Stop Job] will delete all the scanned data. Scanning a job in Separate Scan mode: Touch [Stop Job] to cancel the job, or touch [Continue] to complete the job. Reminder Touching [Stop Job] will delete all the scanned data. VarioLink 9522 8-19...
Page 244 Touching [Stop Job] will delete all the scanned data. Printing the job using Program Job: Touch [Stop Job] to cancel the job, or touch [Continue] to complete the job. Reminder Touching [Stop Job] will delete all the scanned data. 8-20 VarioLink 9522...
Page 245 If machine has been set to display the Copy Screen as the initial screen, touch [MACHINE] tab to display the Machine Status Screen. Press [Stop] on the control panel. Machine operation will be ceased, and the following popup menu will be displayed. VarioLink 9522 8-21...
Page 246 Touch [Print] to stop printing and continue the scanning job. Touch [Scan/Print] to cancel both scanning and printing jobs. Touch [Continue] to restart both jobs. Reminder All the data scanned for stopped job will be deleted. 8-22 VarioLink 9522...
Page 247: Basic Job Settings
Basic Job Settings...
Page 249: Original Setting
Or, select for the original positioned on the original glass with the top to- ward the right side of the machine. Select for the original positioned with the top toward the front of the ma- chine. VarioLink 9522...
Page 250 Touch the desired original direction key to highlight it. Touch [OK] to complete the setting and return to the Copy Screen. – Touch [Default Set] to restore the initial setting, or touch [Cancel] to resume the previous setting. VarioLink 9522...
Page 251: Selecting Binding Direction Of The Original: Bind Direction
Output Setting automatically. For details, see POD Administrator’s Reference. Position the original. – For details on positioning the original, see page 8-8. Touch [Original Setting] on the Copy Screen. The Original Setting Screen will be displayed. VarioLink 9522...
Page 252 Touch [Top] in the Bind Direction area to highlight it. Touch [OK] to complete the setting and return to the Copy Screen. – Touch [Default Set] to restore the initial setting, or touch [Cancel] to resume the previous setting. VarioLink 9522...
Page 253: Copying Mixed Size Originals: Mixed
0 To scan the original from the original glass, Separate Scan mode is re- quired. For details, see "Separate Scan Mode" on page 9-17. 0 With Mixed specified, Auto Paper will function automatically. To copy onto a single and desired paper size, manually specify Auto Zoom. For details, see page 9-29. VarioLink 9522...
Page 254 The Original Setting Screen will be displayed. Touch [Mixed] to highlight it. Touch [OK] to complete the setting and return to the Copy Screen. – Touch [Default Set] to restore the initial setting, or touch [Cancel] to resume the previous setting. VarioLink 9522...
Page 255: Copying Z-Folded Original: Z-Folded Original
Normal originals can be set together with the z-folded original. For details on positioning the original, see page 8-8. Touch [Original Setting] on the Copy Screen. The Original Setting Screen will be displayed. Touch [Z-Folded Orig.] to highlight it. VarioLink 9522...
Page 256: Feeding Single Original From Adf: Single Feed
The Original Setting Screen will be displayed. Touch [Single Feed] to highlight it. Touch [OK] to return to the Copy Screen. – Touch [Default Set] to restore the initial setting, or touch [Cancel] to resume the previous setting. 9-10 VarioLink 9522...
Page 257 Touch [Single Feed] to highlight it. Touch [OK] to return to the Copy Screen. – Touch [Default Set] to restore the initial setting, or touch [Cancel] to resume the previous setting. Touch [Separate Scan]. Select additional copy conditions, as desired. VarioLink 9522 9-11...
Page 258 ADF. – Never set more than one original, otherwise ma- chine trouble may be caused. The set original will be auto- matically fed and scanned. Touch [Scan Complete], then press [Start]. The printing job will start. 9-12 VarioLink 9522...
Page 259: Copying Non-Standard Size Original: Custom Size
Position the original. – For details on positioning the original, see page 8-8. Touch [Original Setting] on the Copy Screen. The Original Setting Screen will be displayed. Touch [Custom Size]. The Custom Size Screen will be displayed. VarioLink 9522 9-13...
Page 260 Select [Full Area] for small original that cannot be detected. Touch [OK]. The Original Setting Screen will be restored. Touch [OK] to return to the Copy Screen. – Touch [Default Set] to restore the initial setting, or touch [Cancel] to resume the previous setting. 9-14 VarioLink 9522...
Page 261: Copying Tabbed Originals: Tab Paper Size
Needless Tab Paper Exit will function if enabled in the Utility mode. See page 4-17 for details. Position the original. – For details on positioning the original, see page 8-8. Touch [Original Setting] on the Copy Screen. The Original Setting Screen will be displayed. VarioLink 9522 9-15...
Page 262 Touch the desired size key to highlight it, then touch [OK]. The Original Setting Screen will be restored. Touch [OK] to return to the Copy Screen. – Touch [Default Set] to restore the initial setting, or touch [Cancel] to resume the previous setting. 9-16 VarioLink 9522...
Page 263: Separate Scan Mode
– Using the ADF, load the original arranged in page order with page one on the top. – For details on positioning the original, see page 8-8. VarioLink 9522 9-17...
Page 264 Replace the original, then press [Start]. – Memory indicator under the message area of the touch panel allows you to check the remaining memory. – Repeat steps 4 and 5 for all original pages to be scanned. 9-18 VarioLink 9522...
Page 265 8-13. All the data in memory will be output. Detail To delete the scanned data without printing or to suspend the printing job, press [Stop]. See "To Stop Scanning/Printing" on page 8-18 for de- tails. VarioLink 9522 9-19...
Page 266: Quality Adjustment
Density by Original Type can shift each of nine density levels described below to three levels lighter or three levels darker. This setting can be made in the Utility mode to use in combination with each of four Original Type modes. For details, see POD Administrator’s Reference. 9-20 VarioLink 9522...
Page 267 For details on positioning the original, see page 8-8. Touch [Darker] to darken, or [Lighter] to lighten the copy image. – Highlight the desired exposure level indicator. – Touch [Std.] to select the middle density level. – When resuming AES, touch [AES]. VarioLink 9522 9-21...
Page 268 Touch [Preset Density 1] or [Preset Density 2] in the Preset Density area to recall the desired preset density. – Touch [OK] to complete the setting. – Touch [Default Set] to restore the initial setting, or touch [Cancel] to resume the previous setting. 9-22 VarioLink 9522...
Page 269: Making Copy Quality Closer To The Original: Original Type
Original Type modes. For details, see POD Administrator’s Reference. Procedure Position the original. – For details on positioning the original, see page 8-8. Touch [Quality Adj.] on the Copy Screen. The Quality Adjustment Screen will be displayed. VarioLink 9522 9-23...
Page 270 Touch the desired mode key in the Original Type area to highlight it. Touch [OK] to complete the setting and return to the Copy Screen. – Touch [Default Set] to restore the initial setting, or touch [Cancel] to resume the previous setting. 9-24 VarioLink 9522...
Page 271: Zoom
Specifying paper size will release 1.000 magnification and set Auto Zoom automatically. In this case, touch [×1.0] to highlight it again. Detail The initial setting may be altered in the Utility mode. Details can be re- ferred in POD Administrator’s Reference. VarioLink 9522 9-25...
Page 272: Changing Magnification Ratio
Then, use the screen keypad to enter the desired magnification ra- tio. The entered ratio will be displayed on the screen. If wrong number is entered, continue by entering the correct number. Touching arrow keys [+] and [,] changes the ratio in 0.001 (0.1%) steps. 9-26 VarioLink 9522...
Page 273 If wrong number is entered, continue by entering the correct number. Touching arrow keys [+] and [,] changes the ratio in 0.001 (0.1%) step.s – Enlarge/Reduce: Touch the desired zoom key in the Enlarge/Reduce area. VarioLink 9522 9-27...
Page 274 Basic Job Settings – Preset Zoom: Touch the desired preset zoom key in the Preset Zoom area. Touch [OK] to return to the Copy Screen. – Touch [Cancel] to resume the previous setting. 9-28 VarioLink 9522...
Page 275: Setting Magnification Ratio Automatically: Auto Zoom
The machine detects the original size automatically. Touch a tray key on the Copy Screen to select the desired paper size. – The [Auto Zoom] key will be highlighted, and a proportional zoom ratio will be automatically determined and displayed on the screen. VarioLink 9522 9-29...
Page 276: Simplex/Duplex Setting
0 The normal double-sided copies (having the same edge as page top) can be made from double-sided originals printed upside down on the back pages. 0 The machine is set to match the binding direction of copies to that of the original automatically. For details, see POD Administrator’s Reference. 9-30 VarioLink 9522...
Page 277 (3) To make normal double-sided copies (having the same edge as page top) from double-sided originals printed upside down on the back pages, touch [Top] in the Bind Direction area to highlight it. (4) Touch [OK] to return to the Copy Screen. VarioLink 9522 9-31...
Page 278 (2) Touch the desired binding direction key to highlight it. To make double-sided copies arranged upside down on the back pages, se- lect [Top]. (3) Touch [OK] to return to the Copy Screen. For details on specifying binding direction of double-sided copies, see page 11-3. 9-32 VarioLink 9522...
Page 279: Making Double-Sided Copies Using Original Glass
For details on positioning the original, see page 8-8. – If Book Copy, Non-Image Area Erase, Size Auto De- tect mode of Image Re- peat, or Image Centering is selected, keep the ADF open throughout the scanning procedure. VarioLink 9522 9-33...
Page 280 (2) Touch and highlight the original direction key according to the direction of the original placed on the original glass. (3) Touch [OK] to return to the Copy Screen. For details on setting original direction, see page 9-3. 9-34 VarioLink 9522...
Page 281 Select additional copy conditions, as desired. Press [Start] to scan. – The front side image of the double-sided copy will be scanned into memory. Replace the original on the original glass with the back side image orig- inal, then press [Start]. VarioLink 9522 9-35...
Page 282 When all originals are scanned, touch [Scan Complete]. Press [Start] to print. All the data in memory will be output. Detail To delete the scanned data without printing, or to suspend the printing job, press [Stop]. For details, see page 8-18. 9-36 VarioLink 9522...
Page 283: Making Single-Sided Copies From Double-Sided Originals
0 The normal single-sided copies (having the same edge as page top) can be made from double-sided originals printed upside down on the back pages. Position the original in the ADF. – For details on positioning the original, see page 8-8. VarioLink 9522 9-37...
Page 284 [Top] in the Bind Direction area to highlight it. (4) Touch [OK] to return to the Copy Screen. For details of original direction setting, see page 9-3. For details of original binding direction, see page 9-5. 9-38 VarioLink 9522...
Page 285: Paper Setting
Detail The Utility mode allows you to delete the registered paper specifications. It also gives efficiency in registering more than one sort of specifications. For details, see POD Administrator’s Reference. VarioLink 9522 9-39...
Page 286: Selecting Paper Size Automatically: Auto Paper
0 Auto Paper will not select the tray of the size specified as Custom. Close the ADF securely, and then press [Reset] on the control panel. – [Auto Paper] is initially selected on the Copy Screen. 9-40 VarioLink 9522...
Page 287 In this case, load paper of the size referred in the message. Reminder Auto Paper may not function for the tray due to the paper specifications registered for that tray, even with the selected size loaded. VarioLink 9522 9-41...
Page 288: Turning On/Off The Image Rotation
5.5"×8.5" 5.5"×8.5" 8.5"×11" 8.5"×11" Normal copying 8.5"×14" Normal copying 8.5"×11" 8.5"×11" 5.5"×8.5" 5.5"×8.5" 8.5"×11" 5.5"×8.5" 5.5"×8.5" The copier is initially set to activate the Image Rotation function automatical- ly. Follow the procedure below to release/resume this function. 9-42 VarioLink 9522...
Page 289 When Image Rotation is released, the Rotation icon on the Copy Screen will disappear to indicate that this function is canceled. Touch to deselect [Image Rotation Off] to resume this function. When Image Rotation is resumed, the Rotation icon will be displayed on the screen. VarioLink 9522 9-43...
Page 290: Using Paper Not Specified To Any Tray: Paper Setting
0 The paper setting programed for a tray following this procedure will be cleared when a new setting is applied to that tray. If the programed set- ting is desired for future use, register it. See page 9-55 for details. 9-44 VarioLink 9522...
Page 291 The changed setting will not be cleared when copying job is com- pleted using that tray. Touch [Paper Setting] to display the Paper Setting Screen. – The Tray Setting Screen can also be accessible by touching [Paper Setting], then [Tray Setting] from the Machine Status Screen. VarioLink 9522 9-45...
Page 292 Basic Job Settings The same settings are available on both Paper Setting and Tray Setting Screens. – To register more than one paper setting, or to delete a registered paper setting, see POD Administrator’s Reference. 9-46 VarioLink 9522...
Page 293 The tray can also be set to detect some specific standard sizes. If desired, touch [Detect Size Setting] to display another screen. Se- lect the desired size key(s), then touch [OK]. (2) Touch [OK] to return to the Paper Setting Screen. VarioLink 9522 9-47...
Page 294 To select a desired wide size: (1) Touch [Size Setting], then touch [Wide Paper]. (2) Select the desired wide size key to highlight it. (3) Touch [Lead Edge], [Rear Edge], or [Center] to specify the de- sired image position. 9-48 VarioLink 9522...
Page 295 (7) Touch [Size Select] to restore the Size Setting Screen. (8) Touch [OK] to complete the setting and return to the Paper Set- ting Screen. – To select a desired tabbed paper size: (1) Touch [Size Setting], then touch [Tab Paper]. VarioLink 9522 9-49...
Page 296 (3) If a custom tabbed paper size is desired, touch [Custom Size] to display the Size Input Screen. (4) Select the lengthwise/widthwise dimension key to highlight it, then use [+], [,], or touch screen keypad to enter the desired spe- cial size. 9-50 VarioLink 9522...
Page 297 – To select a paper setting: (1) Touch [Type/Weight]. (2) Use [Next] or [Previous] to scroll to the desired paper type/weight entry on the list, then touch the key to highlight it. (3) Touch [OK]. VarioLink 9522 9-51...
Page 298 Basic Job Settings – To program a new setting: (1) Touch [Change Setting]. (2) Touch [Paper Type]. Select the desired paper type key, then touch [OK]. 9-52 VarioLink 9522...
Page 299 Select the desired paper weight key, then touch [OK]. (4) Touch [Colored Paper]. Select the desired color key, then touch [OK]. (5) Touch [Hole-Punch]. Touch [Pre-Punched] when using paper with punch holes, or touch [No Hole-Punch] when not, then touch [OK]. VarioLink 9522 9-53...
Page 300 Use [+], [,], or touch screen keypad to enter the desired adjust- ment value, then touch [OK]. The [Chart Adjustment] key is available only when accessed from the Machine Status Screen. For details, see POD Administrator’s Reference. 9-54 VarioLink 9522...
Page 301 Input Name Screen. Selecting a key having a name already displayed will overwrite and clear the existing data. (3) Enter the desired name, then touch [OK]. VarioLink 9522 9-55...
Page 302 Basic Job Settings (4) Touch [OK] to complete the setting. Touch [Close] on the Paper Setting Screen. The tray key with the paper setting changed will display the newly specified settings. 9-56 VarioLink 9522...
Page 303: Setting Reserve Job
Touch [Yes] to make a reserve job setting. Touching [No] will return to the Machine Status Screen with the message “Printing in progress” displayed. In this case, touching [COPY] tab will display the Copy Screen and allows you to make the reserve job setting. VarioLink 9522 9-57...
Page 304 – To check and operate the reserve jobs, touch [JOB LIST] tab to dis- play the Job List Screen. See page 12-3 for details. Printing on the reserve job will start automatically after completing the current job. 9-58 VarioLink 9522...
Page 305 ADF while the message “Ready to set reserve job” is dis- played on the Copy Screen. For details, see page 6-88 of POD Adminis- trator’s Reference. If any trouble occurs on a reserve job, see page 5-54 to page 5-59. VarioLink 9522 9-59...
Page 306: Copy Conditions Incompatible With Basic Job Settings
*1 *1 *1 Special Z-Folded Orig. *1 *1 *1 Single Feed Standard Size Size keys Original *1 *1 Custom Size Full Area Size *1 *1 Tab Paper Size *1 *1 Separate Scan *1: Grayed out (not selectable) 9-60 VarioLink 9522...
Page 307 Custom Size keys Size Full Area Size *1 *1 Tab Paper Size *2 *2 Separate Scan *1: Grayed out (not selectable) *2: The [Start] key becomes unavailable with the message "Combination of these modes is unavailable" displayed. VarioLink 9522 9-61...
Page 308 *3: Selecting Front/Back Cover mode allows the post inserter setting only on the Front/Back Cover Screen. Setting keys provided for main body trays are grayed out to indicate unavailability. *4: Grays out all setting keys for main body trays to indicate unavailability on the Insert Sheet Screen. 9-62 VarioLink 9522...
Page 309 Size Full Area Size Tab Paper Size *1 *1 *1 Separate Scan *1: Grayed out (not selectable) *5: The [Start] key becomes unavailable with the message "Please set original direction as normal in Book copy mode" displayed. VarioLink 9522 9-63...
Page 310 Z-Folded Orig. Single Feed Standard Size Original Custom Size keys Size Full Area Size *1 *1 *1 Tab Paper Size Separate Scan *1: Grayed out (not selectable) *2: Releases and grays out the application function previously selected. 9-64 VarioLink 9522...
Page 311 Direc- tion Upside Down Right Bind Right & Left Direction Normal Mixed Special Z-Folded Orig. Single Feed Standard Size Custom Size keys Original Size Full Area Size Tab Paper Size Separate Scan *1: Grayed out (not selectable) VarioLink 9522 9-65...
Page 312 1-2 mode.) *2: Releases and grays out Auto Paper/Auto Zoom. *3: The [Start] key becomes unavailable with the message "Combination of these modes is unavailable" displayed. 9-66 VarioLink 9522...
Page 313 *2: When scanning mode changes from ADF to original glass, not by selecting another key but by opening the ADF, the simplex/duplex setting automatically changes to 1-1. *3: Makes no reaction to the touch of the key. *4: Limits the adjustment range of Background Removal from 0 to +4. VarioLink 9522 9-67...
Page 314 *2: When scanning mode changes from ADF to original glass, not by selecting another key but by opening the ADF, the simplex/duplex setting automatically changes to 1-1. *3: Makes no reaction to the touch of the key. *4: Limits the adjustment range of Background Removal from 0 to +4. 9-68 VarioLink 9522...
Page 315 Tray 2 Tray 3 Paper Tray 4 Setting Bypass Tray Auto Paper *13 *13 *13 *13 *13 *13 *13 *13 *13 *13 *13 *13 *13 *13 *13 *13 *13 *13 *13 *13 *13 *13 *13 Image Rotation Off VarioLink 9522 9-69...
Page 316 *20: Selecting [With Cover/Print] and [Duplex], the [Start] key becomes unavailable with the message "Duplex mode of Insert Sheet is unavailable in simplex print mode" displayed. *21: Grays out Auto Paper. For Chapters, this change is made only when Print Insertion is selected. 9-70 VarioLink 9522...
Page 317 *18 *18 Tray 2 *18 *18 Tray 3 Paper *18 *18 Tray 4 Setting *18 *18 Bypass Tray *13 *13 *13 *13 *13 *13 *13 *13 *11 *11 *19 *19 *18 *18 Auto Paper Image Rotation Off VarioLink 9522 9-71...
Page 318 *17: Changes to 1-1 mode with the original glass scanning mode selected. *18: Changes to Auto Paper and x1.0 magnification mode. *19: Releases Auto Paper. *21: Grays out Auto Paper. For Chapters, this change is made only when Print Insertion is selected. 9-72 VarioLink 9522...
Page 319 Auto Zoom 2>2 *2 *2 Simplex/ 2>1 Duplex 1>2 *2 *2 1>1 Tray 1 Tray 2 Tray 3 Paper Tray 4 Setting Bypass Tray Auto Paper Image Rotation Off *1: Grayed out (not selectable) *2: Selectable but unavailable VarioLink 9522 9-73...
Page 320 Auto Zoom 2>2 2>1 Simplex/ *2 *2 Duplex 1>2 1>1 *2 *2 Tray 1 Tray 2 Tray 3 Paper Tray 4 Setting Bypass Tray Auto Paper Image Rotation Off *1: Grayed out (not selectable) *2: Selectable but unavailable 9-74 VarioLink 9522...
Page 321: Application Functions
Application Functions...
Page 323: To Use Application Function
To display Application Screen Touch [COPY] tab on the Machine Status Screen to display the Copy Screen. Touch [Application] on the Copy Screen. – The Application Screen will be displayed on the touch panel. VarioLink 9522 10-3...
Page 324 % Touch [All Off] on the Application Screen. Do you want to resume the initial setting? % Press [Reset] on the control panel. Touch [OK] on the Application Screen to return to the Copy Screen. 10-4 VarioLink 9522...
Page 325 [Application] key, so that the set- ting screen of that function can be directly accessed by a single touch from the Copy Screen. See POD Administrator’s Reference, if desired. VarioLink 9522 10-5...
Page 326 Cover Screen of Insert Sheet or Preset Stamp Screen of Stamp/Overlay. Touch this key to highlight it, if desired, so that the screen may be directly accessed from the key displayed under [Application] on the Copy Screen to change the setting you made. 10-6 VarioLink 9522...
Page 327: Inserting Sheets And Covers: Insert Sheet
Back Cover + Blank A blank sheet for back cover will be inserted as the last sheet of copied set. The same result will be obtained when making double-sided cop- ies. VarioLink 9522 10-7...
Page 328 With page 6 specified, the 11th and 12th pages of the double-sided original are duplex-copied onto the insertion which will be the 6th sheet of copied set. The 5th page of double-sided original is simplex-copied onto the inser- tion, which will be the 5th sheet of copied set. 10-8 VarioLink 9522...
Page 329 A blank insertion will be added as the 6th sheet of copied set, after the 5th page of double-sided original is simplex-copied. Prerequisites 0 Use ADF. Use Separate Scan mode if original count exceeds 100 or if original glass is desired for scanning the original. See page 9-17 for de- tails. VarioLink 9522 10-9...
Page 330 To use another paper type/size than the specified paper, touch [Pa- per Setting] on the Copy Screen to change the setting. See page 9-39 for details. Touch [Application] on the Copy Screen. Touch [Insert Sheet] on the Application Screen. The Insert Sheet Screen will be displayed. 10-10 VarioLink 9522...
Page 331 Select the desired cover mode. – To insert a front cover, touch [Front Cover] to display the Front Cov- er Screen. To insert a back cover, touch [Back Cover] to display the Back Cover Screen. Front Cover Screen Back Cover Screen VarioLink 9522 10-11...
Page 332 Touch [Clear] to return to 1. – Touch [OK] to complete the setting and return to the Insert Sheet Screen, or touch [Cancel] to restore the previous setting. Select the desired insertion mode. – Touch [Insert Sheet] on the Insert Sheet Screen. 10-12 VarioLink 9522...
Page 333 To copy on the insertions, touch [Print]. To insert blank sheets, touch [Blank]. Original type of insertions: Simplex/Duplex Touch [Simplex] for single-sided original, or touch [Duplex] for dou- ble-sided original. – Enter Insert Page/Quantity. Touch [Set] to display the popup menu keypad. VarioLink 9522 10-13...
Page 334 What if the same page number is entered twice? % The entry of the larger setting number takes priority. For example, when the same page number is entered both in [Set 002] and [Set 003], the insertion will be made as [Set 003]. 10-14 VarioLink 9522...
Page 335 The Copy Screen will be restored, with the [Insert Sheet] key displayed under the [Application] key. Use this key to jump to the subsequent screen to make any setting change. Enter the desired print quantity from the control panel keypad, then press [Start]. VarioLink 9522 10-15...
Page 336: Locating Title Pages On The Right Side: Chapters
1%2 mode with None selected for Chapter paper. 2%2 + Print Insertion The same page insertion is performed as above, and the chapter pages (2/3 and 5/6) will be printed on paper from another tray source. 10-16 VarioLink 9522...
Page 337 0 Use Page No. of Stamp together with this function to print chapter number onto chapter page in addition to page number. Position the original. Touch [Application] on the Copy Screen. Touch [Chapters] on the Application Screen. VarioLink 9522 10-17...
Page 338 % Not necessary. Chapter insertions occur in sequence even if origi- nal page numbers are entered out of sequence. What if the same page number is entered twice? % The second entry will be ignored on the screen. 10-18 VarioLink 9522...
Page 339 The Copy Screen will be restored, with the [Chapters] key displayed under the [Application] key. Use this key to jump to the subsequent screen to make any setting change. Enter the desired print quantity from the control panel keypad, then press [Start]. VarioLink 9522 10-19...
Page 340: Lay Out Several Pages Onto One Sheet: Combine Originals
4 in 1 Select this setting to print four original images onto one sheet. The page arrangement (numbering direction) can be specified. Horizontal order, left binding Horizontal order, right binding Vertical order, left binding Vertical order, right binding 10-20 VarioLink 9522...
Page 341 0 If the original is placed on the original glass, Separate Scan mode will function automatically. 0 Auto Zoom is automatically selected. Normally the fixed size of tray 1 will be selected. (Available to be changed manually.) Position the original. Touch [Application] on the Copy Screen. VarioLink 9522 10-21...
Page 342 Touch [2-in-1], [4-in-1] or [8-in-1] in the desired order area, referring to the illustrations on previous pages. Touch [OK] to complete the setting. – To restore the previous setting, touch [Cancel]. – To release the Combine Originals function with the current setting remained, touch [Function Off]. 10-22 VarioLink 9522...
Page 343 Auto Zoom is automatically selected. When selecting any tray other than the one that is set and displayed on the Copy Screen, touch the desired tray key. Enter the desired print quantity from the control panel keypad, then press [Start]. VarioLink 9522 10-23...
Page 344: Making A Multiple Page Signature Booklet: Booklet
0 Auto Zoom is automatically selected. Select the desired paper size. Position the original. Load the desired copy paper size in a tray. Available paper sizes are 11" × 17" w, 8.5" × 14" w, 8.5" × 11" – w/v, and 5.5" × 8.5" w/v. 10-24 VarioLink 9522...
Page 345 Touch [Left Bind] or [Right Bind] if you want to change the output order. Touch [OK] to complete the setting. – To restore the previous setting, touch [Cancel]. – To release the Booklet function with the current setting remained, touch [Function Off]. VarioLink 9522 10-25...
Page 346 In this case, use the Page Space and Creep functions in combination. For details, see page 10-62. 10-26 VarioLink 9522...
Page 347: Copying Onto Transparent Films: Ohp Interleave
Do not load transparent films in any tray other than the bypass tray; otherwise machine trouble may occur. Load paper for interleaf sheets into any other tray than the bypass tray. – Be sure to load paper to match the size of transparent films. VarioLink 9522 10-27...
Page 348 The Paper Setting Screen will be displayed. Specify the paper type and weight for the bypass tray. – Select [Fine] for Paper Type, [25–28lb] for Weight. For details of paper setting, see page 9-39. Touch Application on the Copy Screen. 10-28 VarioLink 9522...
Page 349 OHP Interleave function. Select the desired OHP Interleave mode. Touch [OK] to complete the setting. – To restore the previous setting, touch [Cancel]. – To release the OHP Interleave function with the current setting re- mained, touch [Function Off]. VarioLink 9522 10-29...
Page 350 Auto Zoom is selected automatically. To release it, select the desired magnification. Print quantity is already set to 1. You cannot enter any other quantity. Touch the tray key loaded with interleaf sheets to highlight it. Press [Start] on the control panel. 10-30 VarioLink 9522...
Page 351: Inserting Different Original Images Into Printed Sets: Insert Image
1%2 mode. The first scanned image will be inserted after page 2 of the finished set, and the second scanned image will be inserted after page 5. VarioLink 9522 10-31...
Page 352 If the original count exceeds 100, divide them into blocks not ex- ceeding 100 sheets, and load them from the block with the first page. Touch [Application] on the Copy Screen. Touch [Insert Image] on the Application Screen. 10-32 VarioLink 9522...
Page 353 Touch [OK] to complete the setting and return to the Insert Image Screen. Touch [OK] to complete the setting. – To restore the previous setting, touch [Cancel]. – To release the Insert Image function with the current setting re- mained, touch [Function Off]. VarioLink 9522 10-33...
Page 354 9 and 10 for all the originals in page order. Touch [Separate Scan] to exit the Separate Scan mode. Enter the desired print quantity from the control panel keypad, then press [Start]. The machine will start printing when ready for output. 10-34 VarioLink 9522...
Page 355: Dividing Spread Image Into Right And Left Pages: Book Copy
Front Cover + Spread Printed sets will be output from the front cover page, then divided doc- ument pages according to pagination. The original should be scanned from the front cover, then page spread originals in page order. VarioLink 9522 10-35...
Page 356 The original should be scanned from the front cover, back cover, then page spread originals in page order. e.g. Using Booklet in combination to make a booklet: Mode key Description Spread + Booklet ......Front/Back Cover + Spread + Booklet ......10-36 VarioLink 9522...
Page 357 100 sheets, and load them from the block with the first page. – When selecting the Front Cover or Front/Back Cover + Spread mode, follow the procedure on page 10-35 and page 10-36 to scan the front cover first. Touch [Application] on the Copy Screen. VarioLink 9522 10-37...
Page 358 Screen, then select the desired mode. For details, see page 10-24. – Touch [OK] to complete the setting and return to the Book Copy Screen. – For details of scanning order, see page 10-36. Touch [OK] to complete the setting. 10-38 VarioLink 9522...
Page 359 When all originals are scanned, touch [Separate Scan] to exit the Sep- arate Scan mode. Enter the desired print quantity from the control panel keypad, then press [Start]. The machine will start printing when ready for output. VarioLink 9522 10-39...
Page 360: Programing Different Settings For An Output Job: Program Job
0 The paper size specified for the first job will be applied to all subsequent JOBs. 0 Max. 100 JOBs can be programed for an output job. 0 Program Job settings cannot be stored in Program Memory. 10-40 VarioLink 9522...
Page 361 Press [Start] to start scanning. When scanning for the current JOB is completed, the popup menu will be displayed to ask you whether or not to store the scanned image data as a JOB for printing in specified copy conditions. VarioLink 9522 10-41...
Page 362 Touch [Decision] to store the current JOB images. – To delete the scanned images, touch [Cancel]. Repeat above steps until all JOB originals are scanned. When all originals are scanned, touch [Separate Scan] to exit the Sep- arate Scan mode. 10-42 VarioLink 9522...
Page 363 This output setting will be applied to all JOBs. Enter the desired print quantity from the control panel keypad. – Entered quantity will be the count of complete set. Press [Start]. The machine will start printing in conditions specified for each JOB. VarioLink 9522 10-43...
Page 364: Erasing Outside Area Of Original: Non-Image Area Erase
Position the original on original glass with the ADF kept open. – Do not close the ADF. Touch [Application] on the Copy Screen. Touch [Non-Image Area Erase] on the Application Screen. The incompatible function keys will be dimmed to show inactivity. 10-44 VarioLink 9522...
Page 365 See POD Administrator’s Reference. Non-Image Area Erase may perform incorrectly if the lighting in the work place is directly over the original glass. In this case, consult your service representative about an appropriate place for installation. VarioLink 9522 10-45...
Page 366: Reversing Color In Image: Neg-/Positive Reverse
Use this function to reverse the positive image to the negative image and vice versa in the selected color mode. Procedure Position the original. Touch [Application] on the Copy Screen. Touch [Neg-/Positive Reverse] on the Application Screen. The incompatible function keys will be dimmed to show inactivity. 10-46 VarioLink 9522...
Page 367 This key can also be used to display the Application Screen for making setting change. Enter the desired print quantity from the control panel keypad, then press [Start]. The machine will start printing when ready for output. VarioLink 9522 10-47...
Page 368: Repeating Original Image On One Sheet: Image Repeat
0 Use the Size Manual Input mode to repeat a part of the original, not the entire image, by specifying the scanning area. 0 Size Auto Detect mode uses Non-Image Area Erase to automatically de- tect the original size with the ADF kept open. 10-48 VarioLink 9522...
Page 369 Touch [Image Repeat] on the Application Screen. Make setting for Size Manual Input or Size Auto Detect, as desired. – To select Size Manual Input: Touch [Zoom] to highlight it, then use [+]/[,] to specify the desired horizontal/vertical width. VarioLink 9522 10-49...
Page 370 To select Size Auto Detect: Touch [Auto] to highlight it. Touch [OK] to complete the setting. – To restore the previous setting, touch [Cancel]. – To release the Image Repeat function with the current setting re- mained, touch [Function Off]. 10-50 VarioLink 9522...
Page 371 Size Input Screen. Touch this key to highlight it, if desired, so that the screen may be directly accessed from the Copy Screen or Check Screen to change the setting you made. See page 13-7 for details. VarioLink 9522 10-51...
Page 372: Specifying Repeat Times: Repeat
Position the original. – Both ADF and original glass are available. The scanning area varies according to the selected paper size, original direction, and select- ed repeat mode. Touch [Application] on the Copy Screen. 10-52 VarioLink 9522...
Page 373 If you want the image upside down on the other side in 2 Repeat mode, touch [R/D-Reverse] or [L/U-Reverse]. Touch [OK] to complete the setting. – To restore the previous setting, touch [Cancel]. – To release the Image Repeat function with the current setting re- mained, touch [Function Off]. VarioLink 9522 10-53...
Page 374 Available copy modes are 1->1 and 1->2. Selecting [1->2] will select [Separate Scan] automatically. Enter the desired print quantity from the control panel keypad, then press [Start]. The machine will start printing when ready for output. 10-54 VarioLink 9522...
Page 375: Eliminating Copy Marks Along Borders: Frame Center Erase
Erase amount is 1 to 99 mm, in 1 mm increments. 0 Frame Erase and Center Erase can be used in combination. 0 The Frame Erase amount can be specified both collectively for all four sides and individually for each side. VarioLink 9522 10-55...
Page 376 Touch [Application] on the Copy Screen. Touch [Frame Center Erase] on the Application Screen. Touch [Erase/All Sides], [Erase/Each Side], or [Center Erase] to high- light it. – Use Frame erase and Center erase in combination, if desired. 10-56 VarioLink 9522...
Page 377 To specify the erase amount for Erase/Each Side: Touch the desired side key on the right side of the screen to high- light the erase amount in the illustration, then use [,] and [+], or touch panel keypad to enter the desired erase amount. VarioLink 9522 10-57...
Page 378 [Application] key. Use this key to jump to the subsequent screen to make any setting change. Enter the desired print quantity from the control panel keypad, then press [Start]. The machine will start printing when ready for output. 10-58 VarioLink 9522...
Page 379: Copying Image In The Center Of Copy Paper: Image Centering
ADF to scan the original, touch it to deselect this function. – When Book Copy is used in combination, the original smaller than the selected paper size will be printed in the center of the copy pa- per without image division performed. VarioLink 9522 10-59...
Page 380 The machine will start printing when ready for output. Reminder Image Centering may perform incorrectly if the lighting in the work place is directly over the original glass. In this case, consult your service repre- sentative about an appropriate place for installation. 10-60 VarioLink 9522...
Page 381: Printing Images Fully To The Edges: All-Image Area
These keys can also be used to display the Application Screen for mak- ing setting change. Enter the desired print quantity from the control panel keypad, then press [Start]. The machine will start printing when ready for output. VarioLink 9522 10-61...
Page 382: Adjusting Position Of Copy Image: Page Margin - Shift
If image loss is likely, see "Reducing Images to Create Binding Margin: Page Margin - Reduce & Shift" on page 10-68. Right Down Right Left Original Down Left Copies Prerequisites 0 Available shift direction: Up, Down, Right, Left 0 Shift amount: 0 to 250 mm in 1 mm increments 10-62 VarioLink 9522...
Page 383 Application Functions Position the original. Touch [Application] on the Copy Screen. Touch [Page Margin] on the Application Screen. Touch [Shift]. VarioLink 9522 10-63...
Page 384 – Similarly, when Booklet (except Adhesive Binding mode) has been already selected, the [Creep Adj.] key also appears clear. For details of these functions, see page 10-66 and page 10-67. 10-64 VarioLink 9522...
Page 385 [Application] key. Use this key to jump to the subsequent screen to make any setting change. Enter the desired print quantity from the control panel keypad, then press [Start]. The machine will start printing when ready for output. VarioLink 9522 10-65...
Page 386 Image Repeat has already been selected. Use this function to make the desired amount of blank space between the two images on a page. Page space Booklet Original Page space 2 Repeat In Image Repeat Page space Original 10-66 VarioLink 9522...
Page 387 Enter the creep amount of the images on the outermost page, while en- tering the page space amount of the images on the innermost page. Creep Creep Page space (+) Creep Page space (–) Creep VarioLink 9522 10-67...
Page 388: Reducing Images To Create Binding Margin
Position of Copy Image: Page Margin - Shift" on page 10-62. Left binding margin Right Left Down Front Back Front Right binding margin Right Left Down Originals Front Back Back Top binding margin Left Right Right Left Down Back Front 10-68 VarioLink 9522...
Page 389 0 Shift amount: 0 to 250 mm in 1 mm increments Position the original. Touch [Application] on the Copy Screen. Touch [Page Margin] on the Application Screen. Touch [Reduce & Shift]. VarioLink 9522 10-69...
Page 390 [Application] key. Use this key to jump to the subsequent screen to make any setting change. Enter the desired print quantity from the control panel keypad, then press [Start]. The machine will start printing when ready for output. 10-70 VarioLink 9522...
Page 391: Printing Additional Information: Stamp/Overlay
This function allows you to print onto output copies the desired type of pre- set stamp, numbering for multiple sets, page number for multiple pages, date/time, watermark, and watermark numbering. The following six modes are provided for the Stamp function. Mode Description Preset Stamp Set Numbering Page No. VarioLink 9522 10-71...
Page 392 - Fine adjustment for printed position - Start number setting for Set Numbering mode - Start number setting for Page No. mode - Character size/type setting for Page No. and Date/Time modes - Cover/Insert print setting for Page No. 10-72 VarioLink 9522...
Page 393: Printing Stamp Onto Copies: Preset Stamp
10.18.1Printing Stamp onto Copies: Preset Stamp Print the desired letter type selected from preset stamps onto the specified position of copies. Procedure Position the original. Touch [Application] on the Copy Screen. Touch [Stamp/Overlay] on the Application Screen. Touch [Preset Stamp]. VarioLink 9522 10-73...
Page 394 [Application] key. Use this key to jump to the subsequent screen to make any setting change. Enter the desired print quantity from the control panel keypad, then press [Start]. The machine will start printing when ready for output. 10-74 VarioLink 9522...
Page 395: Printing Distribution Number: Set Numbering
Application Functions 10.18.2Printing Distribution Number: Set Numbering Print a distribution number onto the specified position of copies. Procedure Position the original. Touch [Application] on the Copy Screen. Touch [Stamp/Overlay] on the Application Screen. Touch [Set Numbering]. VarioLink 9522 10-75...
Page 396 [Application] key. Use this key to jump to the subsequent screen to make any setting change. Enter the desired print quantity from the control panel keypad, then press [Start]. The machine will start printing when ready for output. 10-76 VarioLink 9522...
Page 397: Printing Page Number
Application Functions 10.18.3Printing Page Number: Page No. Print a page number onto the specified position of copies. Procedure Position the original. Touch [Application] on the Copy Screen. Touch [Stamp/Overlay] on the Application Screen. Touch [Page No.]. VarioLink 9522 10-77...
Page 398 [Application] key. Use this key to jump to the subsequent screen to make any setting change. Enter the desired print quantity from the control panel keypad, then press [Start]. The machine will start printing when ready for output. 10-78 VarioLink 9522...
Page 399: Printing Date/Time: Date/Time
Application Functions 10.18.4Printing Date/Time: Date/Time Print date and time onto the specified position of copies. Procedure Position the original. Touch [Application] on the Copy Screen. Touch [Stamp/Overlay] on the Application Screen. Touch [Date/Time]. VarioLink 9522 10-79...
Page 400 [Application] key. Use this key to jump to the subsequent screen to make any setting change. Enter the desired print quantity from the control panel keypad, then press [Start]. The machine will start printing when ready for output. 10-80 VarioLink 9522...
Page 401: Printing Watermark Onto Copies: Watermark
10.18.5Printing Watermark onto Copies: Watermark Print the desired letter type selected from preset watermarks in the center of printed page background. Procedure Position the original. Touch [Application] on the Copy Screen. Touch [Stamp/Overlay] on the Application Screen. Touch [Watermark]. VarioLink 9522 10-81...
Page 402 [Application] key. Use this key to jump to the subsequent screen to make any setting change. Enter the desired print quantity from the control panel keypad, then press [Start]. The machine will start printing when ready for output. 10-82 VarioLink 9522...
Page 403: Printing Distribution Number As Watermark: Set Numbering
10.18.6Printing Distribution Number as Watermark: Set Number- Print a distribution number in the specified form repeatedly over the scanned image. Procedure Position the original. Touch [Application] on the Copy Screen. Touch [Stamp/Overlay] on the Application Screen. Touch [Set Numbering] in the Watermark area. VarioLink 9522 10-83...
Page 404 [Application] key. Use this key to jump to the subsequent screen to make any setting change. Enter the desired print quantity from the control panel keypad, then press [Start]. The machine will start printing when ready for output. 10-84 VarioLink 9522...
Page 405: Detailed Setting In Stamp/Watermark
([Right] or [Left]). Procedure Touch the desired direction key to highlight it, then use [,] and [+], or touch panel keypad to enter the desired amount. Touch [OK] to complete the setting and return to the previous screen. VarioLink 9522 10-85...
Page 406 If Chapters is already selected, chapter start number and the chapter to be started with chapter numbering can also be specified on this screen. 10-86 VarioLink 9522...
Page 407 Use this function to specify the character size and font for Page No. and Date/Time. Procedure Touch one of the four keys under Character Size to highlight it. Touch either [Gothic] or [Ming] under Font to highlight it. Touch [OK] to complete the setting and return to the previous screen. VarioLink 9522 10-87...
Page 408 Select one of the keys under Print Insert if Print mode has been speci- fied, or one of the two under Blank Insert for Blank mode. Touch [OK] to complete the setting and return to the previous screen. 10-88 VarioLink 9522...
Page 409 Touch [Setting Time] to highlight it. Touch [Set] to highlight it the year, month, day, or time to be changed. Enter the desired number from the touch panel keypad. Touch [OK] to complete the setting and return to the previous screen. VarioLink 9522 10-89...
Page 410: Print Words, Date/Time, Annotation Number Onto Copies: Annotation
However, the serial count will be suspended if this function is deselected or Temporary Number Setting is specified. 0 Printing position can be selected from 9 positions, and fine adjustment is available within ± 0 to 50 mm both in up/down and right/left directions. 10-90 VarioLink 9522...
Page 411 Application Functions Position the original. Touch [Application] on the Copy Screen. Touch [Stamp/Overlay] on the Application Screen. Touch [Annotation]. VarioLink 9522 10-91...
Page 412 Up to 12 alphanumerical characters can be entered. With this setting specified, the entered number or word will be print- ed on all pages the annotation number will not be counted in the former setting. 10-92 VarioLink 9522...
Page 413 Words to type in before annotation number (up to 20 alphanumerical characters) Start number of the annotation number Printing form of the annotation number (2 types provided) Temporary number (up to 12 alphanumerical characters) Font type (Gothic/Ming) Character size (8/10/12/14 point) VarioLink 9522 10-93...
Page 414: Overlaying Image Onto Printed Pages: Overlay
Position the overlaying original. – Position a sheet of original faceup in the ADF or facedown on the original glass. Touch [Application] on the Copy Screen. Touch [Stamp/Overlay] on the Application Screen. Touch [Overlay] to highlight it. 10-94 VarioLink 9522...
Page 415 Repeat steps 10 and 11 when scanning from the original glass, or scanning more than 100 sheets using ADF. Touch [Scan Complete] on the popup menu. Enter the desired print quantity from the control panel keypad, then press [Start]. The machine will start printing when ready for output. VarioLink 9522 10-95...
Page 416: Storing Overlay Image In Hdd/ Overlaying Image Stored In Hdd: Register Overlay
Overlaying Image Recall overlaying Image Output Output Recalled Image Copies in Register Overlay mode Overlay originals 10.21.1Registering Overlay Image To store image Position the overlaying original facedown on the original glass. Touch [Application] on the Copy Screen. 10-96 VarioLink 9522...
Page 417 Application Functions Touch [Stamp/Overlay] on the Application Screen. Touch [Reg. Overlay]. The Image Store/Recall Screen will be displayed. VarioLink 9522 10-97...
Page 418 10-101. Press [Start] on the control panel. The following screen will be displayed to indicate that the machine is now storing the image data in HDD. When completed, the Image Store/Recall Screen will be restored. 10-98 VarioLink 9522...
Page 419: Recalling Registered Overlay Image
Application Functions 10.21.2Recalling Registered Overlay Image To overlay stored image onto each page Touch [Application] on the Copy Screen. Touch [Stamp/Overlay] on the Application Screen. Touch [Reg. Overlay]. The Image Store/Recall Screen will be displayed. VarioLink 9522 10-99...
Page 420 The machine will start printing when ready for output. Note Use Separate Scan mode if original count exceeds 100 or if original glass is desired for scanning the original in Overlay copying. See "Separate Scan Mode" on page 9-17 for details. 10-100 VarioLink 9522...
Page 421 [OK]. If the popup menu shows [OK] only, the existing image data cannot be over- written. Touch [OK] to enter a new name. Either of the above two can be specified in the Administrator setting. VarioLink 9522 10-101...
Page 422: Copy Conditions Incompatible With Application Functions
*2: As the Separate Scan mode is automatically selected, touching the key is ignored and displays a shot message "Please scan Overlay original then normal original". *3: The [Start] key becomes unavailable with the message "Please set original direction as normal in Book copy mode" displayed. 10-102 VarioLink 9522...
Page 423 Shift Page Reduce & Shift *1 *1 *1 *1 *1 *1 *1 Margin Preset Stamp Set Numbering Page No. Date/Time Watermark Stamp/ Watermark Set Numbering Overlay Overlay Reg. Overlay Reg. Overlay(Register) Annotation *1: Grayed out (not selectable) VarioLink 9522 10-103...
Page 424 *1 *1 All-image Area Image Edit Shift Page Reduce & Shift *1 *1 *6 Margin Preset Stamp Set Numbering Page No. Date/Time Watermark Stamp/ Watermark Set Numbering Overlay Overlay Reg. Overlay Reg. Overlay(Register) *1 *1 *1 *1 Annotation 10-104 VarioLink 9522...
Page 425 "Duplex mode of Insert Sheet is unavailable in simplex print mode" displayed. *5: Selecting [With Cover/Print] and [Simplex], the [Start] key becomes unavailable with the message "Simplex print mode of Insert Sheet is unavailable in 2-2 mode" displayed. *6: Automatically selected and unreleasable VarioLink 9522 10-105...
Page 426 *1 *1 *1 *1 *1 *1 *1 *1 *1 Reg. Overlay *1 *1 *1 *1 Reg. Overlay(Register) *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 Annotation 10-106 VarioLink 9522...
Page 427 (not selectable). In other modes, [Temp. No. Set] will be grayed out. *10: The [Front/Back Cover + Spread] key will be grayed out (not selectable). Setting any other mode will release Temporary Number Setting automatically, if already specified. VarioLink 9522 10-107...
Page 428 *1 *1 *1 *1 *1 *1 *1 *1 *1 Reg. Overlay *1 *1 *1 *1 Reg. Overlay(Register) *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 Annotation *1 *10 *10 10-108 VarioLink 9522...
Page 429 (not selectable). In other modes, [Temp. No. Set] will be grayed out. *10: The [Front/Back Cover + Spread] key will be grayed out (not selectable). Setting any other mode will release Temporary Number Setting automatically, if already specified. VarioLink 9522 10-109...
Page 430 *5 *5 *5 *2 Overlay Watermark Set Numbering *5 *5 *2 Overlay *5 *5 *5 *5 *5 *2 Reg. Overlay *5 *5 *5 *5 *5 Reg. Overlay(Register) *1 *1 *1 *1 *1 *1 *1 *1 *1 Annotation 10-110 VarioLink 9522...
Page 431 (not selectable). In other modes, [Temp. No. Set] will be grayed out. *10: The [Front/Back Cover + Spread] key will be grayed out (not selectable). Setting any other mode will release Temporary Number Setting automatically, if already specified. VarioLink 9522 10-111...
Page 432 Overlay Reg. Overlay *1 *1 *1 Reg. Overlay(Register) Annotation *1: Grayed out (not selectable) *3: Grayed out, however, becomes available with Booklet (except Adhesive Binding) selected. *4: The [Start] key becomes unavailable with a warning message displayed. 10-112 VarioLink 9522...
Page 433 (Common) Page Shift Margin Reduce & Shift (Common) Preset Stamp Set Numbering Page No. Date/Time Stamp/ Watermark Overlay Watermark Set Numbering Overlay Reg. Overlay *1 *1 *1 Reg. Overlay(Register) Annotation *1: Grayed out (not selectable) -: Null VarioLink 9522 10-113...
Page 435: Output Setting
Output Setting...
Page 437: Setting Binding Direction For Duplex Copies
Binding Direction for Duplex copying <R & L> <Upper> Copies Originals Prerequisites 0 Top binding for duplex printing functions properly only when duplex mode is selected. 0 If the machine is reset, the binding mode will resume the right/left bind- ing. VarioLink 9522 11-3...
Page 438 Output Setting Touch [Output Setting] on the Copy Screen. The Output Setting Screen will be displayed. Touch [Top] in the Bind Direction area to highlight it. Touch [OK]. 11-4 VarioLink 9522...
Page 439: Sorting/Grouping/Stapling Copies
- Offset Group: Outputs each grouped set offset by approx. 30 mm upon exit. Offset Sort/Offset Group and Staple cannot be used in combination. Example: Make 3 copied sets Sort from 4 original sheets Staple Offset Sort Offset Group Group Offset by 30 mm Offset by 30 mm VarioLink 9522 11-5...
Page 440 Finisher FS-528/FS-611 with Punch Kit PK-505 installed provides Hole- Punch mode to punch output copies. See page 11-19 for details. Finisher FS-528/FS-611 with Post Inserter PI-506 installed allows you to attach cover sheets to output copies. See page 11-22 for details. 11-6 VarioLink 9522...
Page 441 Finisher FS-611, then install it to the primary (main) tray. (2) When copying job is completed, remove the paper guide from the pri- mary (main) tray, and return it to its original position. VarioLink 9522 11-7...
Page 442: Sort/ Group/ Offset Sort/ Offset Group Output To The Primary (Main) Tray
([1 to N] or [N to 1]), as needed. Selecting [N to 1] automatically selects and limits the output face to [Face Up]. Touch [OK] on the Output Setting Screen. The specified output mode icon will be displayed on the Copy Screen. 11-8 VarioLink 9522...
Page 443: Stapling Output To The Primary (Main) Tray
The Output mode icon shows the stapling position currently select- If you want to change the stapling position, proceed to the following steps. Touch [Output Setting] on the Copy Screen. The Output Setting Screen will be displayed. VarioLink 9522 11-9...
Page 444 Staple is compatible with Sort or Group, while Offset Sort and Off- set Group are incompatible. The Output Setting Screen will be restored. Touch [OK] on the Output Setting Screen. The specified output mode icon will be displayed on the Copy Screen. 11-10 VarioLink 9522...
Page 445: Sort/ Group Output To The Secondary (Sub) Tray
Change the output tray and select the desired output mode by following the procedure below. Procedure Position the original. Touch [Output Setting] on the Copy Screen. The Output Setting Screen will be displayed. Touch [Sub Tray]. VarioLink 9522 11-11...
Page 446 Touch [OK] on the Output Setting Screen. The specified output mode icon will be displayed on the Copy Screen. Reminder Be careful not to exceed the finisher tray capacity when selecting the print quantity, otherwise unexpected trouble may be caused. 11-12 VarioLink 9522...
Page 447: Making Folded Booklet: Multi Half Fold/ Fold & Staple/Trimming
32 sets max. of 11 to 16-sheet-folded booklet (512 sheets max.) 25 sets max. of 17 to 20-sheet-folded booklet (500 sheets max.) Position the original. Touch [Output Setting] on the Copy Screen. The Output Setting Screen will be displayed. VarioLink 9522 11-13...
Page 448 To release the Multi Half/Fold & Staple function, touch [Function Off]. The Output Setting Screen will be restored. Touch [OK] on the Output Setting Screen. The specified output mode icon will be displayed on the Copy Screen. Booklet in Application is selected automatically. 11-14 VarioLink 9522...
Page 449: Folding Copies In Three: Multi Tri-Fold
0 Selecting Outside Print also sets the output face to Face Down, while In- side Print sets to Face Up automatically. Position the original. Touch [Output Setting] on the Copy Screen. The Output Setting Screen will be displayed. VarioLink 9522 11-15...
Page 450 To release the function with current setting remained, touch [Func- tion Off]. The Output Setting Screen will be restored. Touch [OK] on the Output Setting Screen. The specified output mode icon will be displayed on the Copy Screen. 11-16 VarioLink 9522...
Page 451: Output Z-Folded Copies: Z-Fold
0 Some plain paper types may cause fold line to shift. 0 Paper cannot be fed from trays specified as any size other than Standard. (Unavailable for the sizes specified in Detect Size Setting, Custom, Wide Paper or Tab Paper) VarioLink 9522 11-17...
Page 452 Touch [Z-Fold] to highlight it. Touch [OK] on the Output Setting Screen. – To restore the previous setting, touch [Cancel]. – To restore the default setting, touch [Default Set]. The specified output mode icon will be displayed on the Copy Screen. 11-18 VarioLink 9522...
Page 453: Punching File Holes In Copies: Punch
0 If the ATS (Automatic Tray Switching) functions while the machine uses the Punch mode, the punch holes may be slightly off the appropriate po- sitions. 0 Special size paper (sizes specified in Detect Size Setting, Custom, Wide Paper or Tab Paper) cannot be punched. VarioLink 9522 11-19...
Page 454 If you want to change the number of punch holes and punch posi- tion, proceed to the following steps. Touch [Output Setting] on the Copy Screen. The Output Setting Screen will be displayed. Touch [Hole-Punch]. The Hole-Punch Screen will be displayed. 11-20 VarioLink 9522...
Page 455 DO NOT allow any object to interfere with the operation of the tray on the left side of the finisher, as any interference may cause damage to the finisher. Be careful not to exceed the finisher tray capacity when selecting the print quantity, otherwise unexpected trouble may be caused. VarioLink 9522 11-21...
Page 456: Cover Sheet Feeding: Post Inserter
0 Upper/Lower tray capacity: 200 sheets (21 lb paper) or within 30 mm thick each 0 Use ADF. 0 The cover paper size should be the same as copy paper size. 0 Cover paper loaded in the post inserter cannot be copied. 11-22 VarioLink 9522...
Page 457 Output Setting Load cover paper into the upper and lower trays of the post inserter. Upper tray Lower tray Use Insert Sheet or Booklet function to attach covers to the output copies. VarioLink 9522 11-23...
Page 458: Using Finisher Manually
– Punch Reminder The Z Folding Unit ZU-607 cannot be used for manual punch. To use Punch mode manually, Punch Kit PK-505 is necessary. Start/Stop button Fold & Staple Corner staple 2 parallel staples Multi Tri-Fold Punch 11-24 VarioLink 9522...
Page 459 – Punch: Place paper face UP, with the punch side on the left. – Fold & Staple: Place the front of the finished set UP. – Multi Tri-Fold: Place the outside of the fold UP. VarioLink 9522 11-25...
Page 460 To use Staple in combination, turn on the desired Staple mode lamp. To select only the Punch mode, turn off all the other mode lamps. Press Start/Stop button. Do you want to stop the output operation? % Press Start/Stop button on the operation panel of post inserter. 11-26 VarioLink 9522...
Page 461: Using Multi Punch Gp-501
Output Setting 11.9 Using Multi Punch GP-501 Using Multi Punch GP-501, the following six types of punch holes can be made in printed sheets. Die set model Hole type DS-501 DS-502 DS-503 DS-504 DS-505 DS-506 VarioLink 9522 11-27...
Page 462: Punching File Holes In Copies
When selecting [Top], position the original widthwise. Touch [Punch] on the Copy Screen. The Output Application icon shows the punch position currently select- ed. If you want to change the punch position, proceed to the following steps. 11-28 VarioLink 9522...
Page 463 Touch the desired key to select the punch position. Touch [OK]. – To restore the previous setting, touch [Cancel]. – To release the Hole-Punch function with the current punch position setting remained, touch [Function Off]. The Output Setting Screen will be restored. VarioLink 9522 11-29...
Page 464 Output Setting Touch [OK] on the Output Setting Screen. The specified output mode icon will be displayed on the Copy Screen. 11-30 VarioLink 9522...
Page 465: Exchanging The Die Set
– Be sure to align the die set punch blade posi- tion indicator to the hor- izontal line, otherwise the die set cannot be withdrawn. Slowly withdraw the die set. VarioLink 9522 11-31...
Page 466 Output Setting Take out the desired die set from the rack to replace it with the one currently set. – Securely set the die set in position. 11-32 VarioLink 9522...
Page 467 Output Setting Put the replaced die set into the rack. – The replaced die set is supposed to be stored in the rack. Close the multi punch front door. VarioLink 9522 11-33...
Page 468: Using Two Copiers In Tandem
In this case, copying will be available by entering the user/account pass- word in the master machine only. The password will be transmitted to the tandem machine automatically so as to enable the copying operation. See POD Administrator’s Reference for details of setting User Authenti- cation function. 11-34 VarioLink 9522...
Page 469: Using Tandem Mode
Confirm that both copiers are ready to copy with the Copy Screen displayed. Touch [Output Setting] on the Copy Screen of either copier. The Output Setting Screen will be displayed. Touch [Tandem] to highlight it, then touch [OK]. VarioLink 9522 11-35...
Page 470 – When the print quantity entered is an odd number, the master ma- chine will copy and output one sheet/set more than the tandem ma- chine to accommodate the job. Position the original on the master machine. 11-36 VarioLink 9522...
Page 471 Interrupt mode during Tandem mode copying: Interrupt copying is available only on the copier with [Interrupt] pressed. The tandem mode copying on the copier in interrupt mode will be sus- pended until the interrupt copying is completed. VarioLink 9522 11-37...
Page 472 Take the appropriate troubleshooting measures to be ready for copying. Tandem printing job cannot be started if 100 reserve jobs (not in tan- dem mode) are entered on the tandem machine. Wait until the reserve jobs are completed on the tandem machine. 11-38 VarioLink 9522...
Page 473: To Stop Scanning/Printing
The tandem machine stops the current operation immediately, and the popup menu appears on the Copy Screen of the tandem machine to ask you whether to continue or cease the operation. At this time, the tandem mode is not yet released. VarioLink 9522 11-39...
Page 474: Troubleshooting
The machine that is trouble free handles the remaining print quantity and completes the job. When the job is completed, take the appropriate troubleshooting measures to correct the problem. 11-40 VarioLink 9522...
Page 475 Distribution recovery mode functions to complete the job on the master machine. When the power is turned off on either the master or tandem machine: The tandem mode will be released automatically in either case. Restart the procedure from the first step. VarioLink 9522 11-41...
Page 476: Copy Conditions Incompatible With Output Settings
*2: Releases Offset Group/ Group and selects Sort. The [Offset Group] and [Group] keys are grayed out. *3: The [Start] key becomes unavailable with a warning message displayed when Auto Paper mode in Mixed and Multi Punch (GP) are selected. 11-42 VarioLink 9522...
Page 477 HDD Store Staple Hole-Punch Right & Left Bind Direction Face Up Face Face Down Output 1 to N Order Setting N to 1 (without Offset Sort finishing Offset Group options) Output Sort Group Tandem HDD Store Sort Group VarioLink 9522 11-43...
Page 478 N to 1 (without Offset Sort finishing Offset Group options) Output Sort Group Tandem HDD Store Sort Group *1: Changed to Face Down and Face Up is grayed out. *2: Selectable but ineffective as binding direction setting 11-44 VarioLink 9522...
Page 479 *9: Selects Sort and grays out all the other output mode keys. *11: The [Start] key becomes unavailable with a warning message displayed. *13: Selects Sort and grays out Offset Sort and Offset Group. *15: Selects Group and grays out Offset Sort and Offset Group. -: Null VarioLink 9522 11-45...
Page 480 *9 *9 *14 *9 *13 *13 *13 *13 *13 *13 *13 finishing Offset Group *9 *9 *14 *9 *15 *15 *15 *15 *15 *15 *15 options) Output Sort Group *9 *9 Tandem HDD Store Sort Group *9 *9 11-46 VarioLink 9522...
Page 481 *14: Selects Group and grays out Offset Sort, Offset Group and Sort. *15: Selects Group and grays out Offset Sort and Offset Group. *16: Grayed out (not selectable) when DipSW28-7 (switch to allow/prohibit Repeat + Staple) is specified as 0 (Prohibit). VarioLink 9522 11-47...
Page 482 *6: Grayed out (not selectable) *8: Selects Sort, releases Punch/Staple and any folding mode and grays out [Output Setting]. *13: Selects Sort and grays out Offset Sort and Offset Group. *15: Selects Group and grays out Offset Sort and Offset Group. 11-48 VarioLink 9522...
Page 483 *11: Condition last selected has priority. Condition previously selected will be released. *12: Displays a warning message when inconformity in binding direction is found (staple position/ punch position/ binding direction in duplex copying). x: Grayed out (including automatic release) VarioLink 9522 11-49...
Page 484 *11: Condition last selected has priority. Condition previously selected will be released. *12: Displays a warning message when inconformity in binding direction is found (staple position/ punch position/ binding direction in duplex copying). x: Grayed out (including automatic release) 11-50 VarioLink 9522...
Page 485: Job Management
Job Management...
Page 487: Overview Of The Job List Screen
The Job List Screen will be displayed. Touch the desired key at the bottom of the screen. See the following pages for details of each subsequent screen. Touch any tab key to exit the Job List Screen. VarioLink 9522 12-3...
Page 488: Job Operation On Job List Screen
Operation for reserved jobs Touch [JOB LIST] tab on the screen, then touch [Reserved Job] if not highlighted. – Check the status of the reserved jobs. – Touch [Next] to scroll, if 8 or more jobs are entered. 12-4 VarioLink 9522...
Page 489 To check the settings of reserve job: Touch the desired reserve job key to highlight it, then touch [De- tails]. Check the settings of the selected job on the screen. Touch [Close] to return to the Job List Screen. VarioLink 9522 12-5...
Page 490: Displaying Output History
Touch [Next] to scroll, if 8 or more jobs are entered. Touch the desired job key, then touch [Details]. – Detailed settings of the selected job will be displayed. – Touch [Close] to return to the previous screen. 12-6 VarioLink 9522...
Page 491: Displaying Send History
Touch [Next] to scroll, if 8 or more jobs are entered. Touch the desired job key, then touch [Details]. – Detailed settings of the selected job will be displayed. – Touch [Close] to return to the previous screen. VarioLink 9522 12-7...
Page 492: Checking Incomplete Jobs
Touch [Next] to scroll, if 8 or more jobs are entered. Touch the desired job key, then touch [Details]. – Detailed settings of the selected job will be displayed. – Touch [Close] to return to the previous screen. 12-8 VarioLink 9522...
Page 493: Checking/Operating Suspended Jobs
The letters “Suspended” on the key appears orange to prompt you that a suspended job remains in the machine. – Check the status of suspended jobs. – Touch [Next] to scroll, if 8 or more jobs are entered. VarioLink 9522 12-9...
Page 494 To check the settings of suspended job: Touch the desired job key to highlight it, then touch [Details]. Check the settings of the selected job on the screen. Touch [Close] to return to the Job List Screen. 12-10 VarioLink 9522...
Page 495: Checking/Controlling Spool Jobs
– To clear spool job: Touch the desired job key to highlight it, then touch [Delete]. Touch [Yes] on the popup menu to clear the selected job. All the data of the selected job will be cleared. VarioLink 9522 12-11...
Page 497: Advanced Information
Advanced Information...
Page 499: Making Sample Set For Checking Results: Proof Copy
The screen for checking the job settings will be displayed. Check the job settings. – On the screen, [Next] and [Previous] may be displayed depending on the selected application function. Touch the keys to check the setting. VarioLink 9522 13-3...
Page 500 Additional proof copy is available so that you can check the result of setting change. Touch [Proof Copy] to output a sample set and again to display the Check Screen. Touch [Close]. The Copy Screen will be restored. Press [Start]. The machine will start printing. 13-4 VarioLink 9522...
Page 501: Checking Feature Selections Before Copying: Check Mode
0 Proof Copy becomes available when the original is loaded or scanned us- ing Separate Scan mode. Select the desired copy conditions on the Copy Screen. Press [Mode Check] on the control panel. The Check Screen will be displayed. VarioLink 9522 13-5...
Page 502 Screen to highlight it, then touch [Change Setting]. The touch panel will display an appropriate screen to change the copying condition selected. – Change the setting as desired, then press [Check] to restore the Check Screen to return to the checking steps. 13-6 VarioLink 9522...
Page 503 For these functions, the [Change Setting] key will not be active when the function key is highlighted. Only the [Clear] key can be used to clear the function. – To start printing without proof copying, proceed to step 6. VarioLink 9522 13-7...
Page 504 If proof copying has been made, the machine will simply start printing without scanning originals. Note If the desired selection cannot be changed, press [Stop] to delete all the data in memory, then press [Reset] to restart the job setting. 13-8 VarioLink 9522...
Page 505: Interrupt Copying
0 Auto Low Power or Auto Shut Off will not function during Interrupt mode. Press [Interrupt] on the control panel. The Interrupt LED starts flashing, then keeps lighted when machine is ready for Interrupt mode. The Copy Screen for Interrupt copying will be displayed. VarioLink 9522 13-9...
Page 506 Position the original, then press [Start] to start the interrupt copying. When Interrupt copying is completed, press [Interrupt] again. The Interrupt LED turns out and the Machine Status Screen will be dis- played, with the settings of the initial job restored. Press [Start] to resume copying. 13-10 VarioLink 9522...
Page 507: Storing And Recalling Job Conditions: Mode Memory
0 Up to 30 jobs can be stored. 0 Stored job can be registered to a function key. Make the desired job selections from the Copy Screen. Press [Mode Memory] on the control panel. The Mode Memory Screen will be displayed. Touch [Store]. VarioLink 9522 13-11...
Page 508 ( ) can be overwritten. – The key with a lock icon ( ) is locked and cannot be selected. – Touch [OK] to proceed to the Name Input Screen. 13-12 VarioLink 9522...
Page 509 If you do not with to enter a name, simply touch [OK]. The key dis- plays 16 asterisks (*) in place of a name. Touch [OK] on the Mode Memory Screen. Do you want to cancel this operation? % Touch [Cancel]. VarioLink 9522 13-13...
Page 510: Recalling Stored Job Settings
Touch a job key to select a job you want to recall. – The job keys numbered from 01 to 18 are displayed on the screen. Touching [Next] will display the keys from 19 to 30. 13-14 VarioLink 9522...
Page 511 % Touch [OK] instead of [Job Check]. Proceed to step 5. Touch [OK] on the Check Screen. The settings of the selected job will be recalled on the restored Copy Screen. Position the original, then press [Start] to print. VarioLink 9522 13-15...
Page 512: Function Key
0 Function key will be void if the job setting assigned to that key is deleted in Mode Memory. Position the original. Display the Copy Screen. – Touch [COPY] tab on the Machine Status Screen to display the Copy Screen. 13-16 VarioLink 9522...
Page 513 Advanced Information Touch the desired function key. The copy conditions of Mode Memory assigned to that key will be re- called on the screen. Enter the desired print quantity, then press [Start] to print. VarioLink 9522 13-17...
Page 514: Recalling Previous Job Settings
The Check Screen will be displayed. Check the previous job settings on the screen. Touch [OK] on the Check Screen. The settings of the previous output job will be recalled on the Copy Screen. Position the original, then press [Start]. 13-18 VarioLink 9522...
Page 515: Displaying Screen For Operation Guide: Help Mode
[Help] on the control panel. To reach item 07, 08, or 09 from any subordinate Help Screens, touch [Top Menu] to display the top page, then select the desired item. To display Help Screen Pressing [Help] from the Machine Status Screen: VarioLink 9522 13-19...
Page 516 Advanced Information Pressing [Help] from the Copy Screen: Top Page of the Help Screen: This screen will be displayed when [Top Menu] on the subordinate Help Screen is touched. 13-20 VarioLink 9522...
Page 517: Adjusting Response Time Of Touch Keys: Accessibility
The Accessibility LED lights in blue to indicate that the specified re- sponse time is set on the machine. To deactivated this function, press [Accessibility] for one second or longer. The Accessibility LED goes off, and normal response time will be re- stored in touch key operation. VarioLink 9522 13-21...
Page 518: Controlling/Monitoring Copier From Browser: Remote Panel
The following functions are unavailable: - Reading the screen performed by subsidiary system - Turning ON/OFF the machine power (Main/Sub power switch, Power Save, Weekly Timer) - Reporting paper misfeed, or displaying counter in real time 13-22 VarioLink 9522...
Page 519: Controlling Copier From Browser: Remote Panel
[Reload] at the upper corner of the screen to display the current sta- tus. Start the web browser, then enter the IP address of the main body in the address bar. The Web Utilities screen will be displayed. VarioLink 9522 13-23...
Page 520 – Clicking [Lock Real Panel] will activate the Operation Panel Lock function to void any operation from the touch panel and control panel. In this case, the machine operation is available from the Re- mote Panel only. 13-24 VarioLink 9522...
Page 521: Monitoring Copier From Browser: Remote Monitor
The state of the machine, touch panel screen, and job condition will be displayed. Clicking the touch panel screen on the Remote Monitor will display the Remote Panel in an exclusive window to allow the machine operation from PC. VarioLink 9522 13-25...
Page 522: Monitoring Copier From Browser: Multi Monitor
Click [Multi Monitor] on the Web Utilities screen. The state of the machine, touch panel screen, and job condition of up to 10 machines are displayed in tile view. The Remote Panel will also be displayed in the same browser. 13-26 VarioLink 9522...
Page 523 When the Operation Panel Lock function is activated, the Remote Moni- tor displays the lock screen of the touch panel. Click the lock screen to enable the machine operation from the Remote Panel. Detail For details of the Remote Panel, see page 13-23. VarioLink 9522 13-27...
Page 525 Index...
Page 527 Before successive holidays 1-9 Custom Size 9-13 Bind Direction 9-5 Binding direction of duplex copies Data LED 2-7 11-3 Book Copy 10-35 Date/Time 10-79 Detailed Setting in Booklet 10-24 Stamp/Watermark 10-85 Bookmark key 10-6 Developer counter 6-7 Browser 13-22 VarioLink 9522 14-3...
Page 528 Legal Restrictions on Copying Frame Center Erase 10-55 Contents-19 Front door 2-4 Limited use of the machine in trouble 5-4 Loading Paper 4-3 Grounding 1-6 Loading Tabbed Sheets 4-15 Group mode 11-5 Machine Configuration 2-3 Help key 2-7 14-4 VarioLink 9522...
Page 529 Precaution for use of finisher 1-21 Output History 12-6 Precautions for Installation and Use Output paper counter 6-5 Output to the primary (main) tray 11- Preparation for Use 2-3 Preset Stamp 10-73 Output to the secondary (sub) tray Preset Zoom 9-28 11-6 VarioLink 9522 14-5...
Page 530 Trimmer stacker 2-20 Setting Job During Warmup 8-15 Trimmer unit tray 2-20 Setting Print Quantity 8-13 Trimmer Unit TU-502 2-20 Shift 10-62 Trimming 11-13 Simplex/Duplex Setting 9-30 Troubleshooting 5-3 Single Feed 9-10 Troubleshooting Tips 5-65 Sort mode 11-5 14-6 VarioLink 9522...
Page 531 Ventilation 1-8 Warmup 2-26 Warning and precaution symbols 1- Watermark 10-81 Weekly Timer 2-33 When moving the machine 1-9 Z Folding Unit ZU-607 2-19 Z-Fold 11-17 Z-Folded Original 9-9 Zoom 9-25 Zoom (individual) 9-27 Zoom (proportional) 9-26 VarioLink 9522 14-7...
Page 532 Beyond the Ordinary Printing for Professionals...

Oce variolink 9522 User Manual

1 Precautions for Installation and Use

2 Preparation for Use

3 Paper and Original Information

4 Supplies & Handling

5 Troubleshooting

6 Maintenance

7 Specifications

8 Before Making Copies

9 Basic Job Settings

10 Application Functions

11 Output Setting

12 Job Management

13 Advanced Information

Quick Links

Troubleshooting

Related Manuals for Oce variolink 9522

Summary of Contents for Oce variolink 9522