Changing Magnification Ratio - Oce variolink 9522 User Manual

9
9.4.2

Changing Magnification Ratio

The following four modes are provided.
- Zoom (proportional): 0.250 to 4.000 in 0.001 (0.1%) increments
- Zoom (individual): Vertical and horizontal zoom ratios can be specified in-
dividually within the range from 0.250 to 4.000 in 0.001 (0.1%) incre-
ments.
- Enlarge/Reduce: Select one from the eight ratios (0.500, 0.647, 0.772,
0.785, 1.214, 1.294, 1.545, 2.000) provided on the screen.
- Preset Zoom: Select one from the three ratios previously programed.
!
Detail
The Enlarge/Reduce and Preset Zoom ratio setting is described in POD
Administrator's Reference.
Procedure
1
Touch [Zoom] on the Copy Screen.
2
Specify the desired magnification.
– Zoom (proportional):
Touch the proportional zoom key at the upper left corner in the
Zoom area to highlight it.
Then, use the screen keypad to enter the desired magnification ra-
tio. The entered ratio will be displayed on the screen.
If wrong number is entered, continue by entering the correct
number.
Touching arrow keys [+] and [,] changes the ratio in 0.001 (0.1%)
steps.
9-26
Basic Job Settings
VarioLink 9522