To Stop Scanning/Printing - Oce variolink 9522 User Manual

Output Setting

11.10.2To Stop Scanning/Printing

To cancel the tandem printing job:
1
Press [Stop] on the control panel of the master machine.
The scanning/printing job stops immediately, and the popup menu ap-
pears on the Copy Screen of the master machine to ask you whether
to continue or terminate the job. At this time, the tandem mode is not
yet released.
2
Touch [Stop Job].
All the scanned data will be cleared to release the tandem mode. How-
ever, if the data transmission has already been completed, the tandem
job on the tandem machine has to be canceled separately.
Touch [Job List] on the touch panel of the tandem machine to display
the Job List Screen, then delete the tandem job.
To stop the job canceling procedure, touch [Continue] on the popup
menu.
To cancel the job on the tandem machine only:
1
Press [Stop] on the control panel of the tandem machine.
The tandem machine stops the current operation immediately, and the
popup menu appears on the Copy Screen of the tandem machine to
ask you whether to continue or cease the operation. At this time, the
tandem mode is not yet released.
VarioLink 9522
11
11-39