Copying Onto Transparent Films: Ohp Interleave - Oce variolink 9522 User Manual

Application Functions
10.6

Copying onto Transparent Films: OHP Interleave

Use the OHP Interleave function in 1-1 or 2-1 mode to copy onto overhead
projection transparent films, and output a blank or copied interleaf sheet with
each copied transparent film.
In the Interleave Blank mode, a blank interleaf sheet is output with each
transparent film to keep the film material from sticking together.
In the Interleave Copy mode, a copied interleaf sheet is output with each
transparent film to provide reference during a presentation, a medium for
photocopying, and a set for filing or inserting into a binder.
Original
Prerequisites
0 Load transparency films in the bypass tray. Paper type/weight for the by-
pass tray should be specified as Fine and 92–105 g in Paper Setting.
0 Print quantity: 1
0 Finisher cannot be used; output mode is fixed to Sort.
0 Auto Zoom is automatically selected.
0 Duplex copying is unavailable.
1
Position the original.
2
Set transparent films into the bypass tray.
– Do not load transparent films in any tray other than the bypass tray;
otherwise machine trouble may occur.
3
Load paper for interleaf sheets into any other tray than the bypass tray.
– Be sure to load paper to match the size of transparent films.
VarioLink 9522
Blank interleaf sheets
Transparent films
Interleave Blank mode
Copied interleaf sheets
Transparent films
Interleave Copy mode
10
10-27