Sort/ Group Output To The Secondary (Sub) Tray - Oce variolink 9522 User Manual

Hide thumbs Also See for variolink 9522:

Table of Contents

Output Setting

The primary (main) tray gradually goes down while printed materials are

output. DO NOT allow any object to interfere with the operation of the tray

on the left side of the finisher, as any interference may cause damage to

the finisher.

Be careful not to exceed the finisher tray capacity when selecting the

print quantity, otherwise unexpected trouble may be caused.

11.2.3 Sort/ Group Output to the Secondary (Sub) Tray

A machine with Finisher FS-528/FS-611 installed is set to output sorted sets

to the primary (main) tray by default, regardless of whether or not to be

equipped with other optional devices. Change the output tray and select the

desired output mode by following the procedure below.

Position the original.

Touch [Output Setting] on the Copy Screen.

The Output Setting Screen will be displayed.

Touch [Sub Tray].

VarioLink 9522