Sorting/Grouping/Stapling Copies - Oce variolink 9522 User Manual

Output Setting
11.2

Sorting/Grouping/Stapling Copies

The Finisher FS-528/FS-611 has a primary (main) tray and a secondary (sub)
tray, each of which has the basic output modes as described below.
Output to the primary (main) tray:
- Sort: Outputs multiple copies of the original set.
- Group: Groups together multiple copies of each original.
- Staple: Staples each sorted/grouped set with one staple at the corner or
two staples along the edge.
- Offset Sort: Outputs each sorted set offset by approx. 30 mm upon exit.
- Offset Group: Outputs each grouped set offset by approx. 30 mm upon
exit.
Offset Sort/Offset Group and Staple cannot be used in combination.
Sort
Group
VarioLink 9522
Staple
Offset Sort
Offset by 30 mm
Example:
Make 3 copied sets
from 4 original sheets
Offset Group
Offset by 30 mm
11
11-5