Table of Contents
Advertisement
Advanced Information
13.3
Interrupt Copying
Use the Interrupt mode to interrupt copying in progress to perform a simple
job. When interrupt copying is completed, the settings for the previous job
restore automatically and the Copy Screen displays.
Prerequisites
0 The Interrupt mode cannot be selected with the following conditions:
Machine is not operating printing or scanning job.
Register Overlay is in use.
The Call for Service message displays or a paper misfeed occurs.
Already using Interrupt mode.
0 Reserve job cannot be operated in Interrupt mode.
0 Auto Low Power or Auto Shut Off will not function during Interrupt mode.
1
Press [Interrupt] on the control panel.
The Interrupt LED starts flashing, then keeps lighted when machine is
ready for Interrupt mode.
The Copy Screen for Interrupt copying will be displayed.
VarioLink 9522
13
13-9
Advertisement
Table of Contents
Troubleshooting
