Specifying Control Panel Settings (Accessibility Mode); Displaying The Accessibility Setting Screen; To Set The "Key Repeat Start/Interval Time" Function - Oce cm4520 User Manual

Additional Copy Operations
4.7 Specifying Control Panel Settings (Accessibility
Mode)
This section contains details on the procedures for specifying control panel
settings and adjusting the touch panel.

Displaying the Accessibility Setting Screen

% Press the [Accessibility]
key.
The Accessibility Setting
screen appears.

To set the "Key Repeat Start/Interval Time" function

The length of time until the value begins to change after a touch panel button
is held down and the length of time for the value to change to the next
number can be specified. The factory default setting for "Time To Start" is
0.8 second and the factory default setting for "Interval" is 0.3 second.
0 The settings specified for the "Key Repeat Start/Interval Time" function
are only applied in the Enlarge Display mode.
1
Display the Accessibility Setting screen. (To display the screen, refer to
page 4-23)
2
Touch [Key Repeat Start/Interval Time] or press the [1] key in the key-
pad.
cm4520
Accessibility
4
4-23