Automatically Conserving Energy: Auto Low Power - Oce variolink 9522 User Manual

2
2.4.1

Automatically Conserving Energy: Auto Low Power

This function conserves energy by lowering the power consumption.
Auto Low Power activates automatically after a specified period (initially 15
minutes) of copier inactivity with the Power Save LED lit, touch panel gone
off, and all other LEDs except Start LED on the control panel turned off. The
Start LED will turn orange, while the Power LED keeps blue.
Note
If the Auto Shut Off function activates at the same time, the power will be
turned off.
The touch panel will not go off during a duplex copying job or when the
Jam Position Screen is displayed.
!
Detail
The Auto Low Power function can be set for 1 minute/ 3 minutes/ 5 min-
utes/ 10 minutes/ 15 minutes/ 30 minutes/ 60 minutes/ 90 minutes/ 120
minutes/ 240 minutes. See POD Administrator's Reference for details.
To exit Auto Low Power
Press or touch any key on the control panel and touch panel.
2-30
Preparation for Use
VarioLink 9522