Using Tandem Mode - Oce variolink 9522 User Manual

Output Setting

11.10.1Using Tandem Mode

Prerequisites
0 Two copiers should have the same optional configuration.
0 The copier with the [Tandem] key selected on the Output Setting Screen
will be the master machine, turning both copiers into the tandem mode.
0 Select the copying conditions, scan originals, and press [Start] on the
master machine to operate both copiers in tandem to complete a job.
0 Auto Low Power/ Auto Shut Off may function while tandem mode is se-
lected. For details, see page 11-38.
0 This machine is provided with an Distribution Recovery mode, which
functions when trouble occurs in either the master or tandem machine to
allow the trouble-free copier to complete the job.
0 The image data stored in HDD can be output in tandem mode copying.
0 Tandem mode is unavailable if Enhanced Security mode is activated.
1
Turn power on the two copiers.
– Confirm that both copiers are ready to copy with the Copy Screen
displayed.
2
Touch [Output Setting] on the Copy Screen of either copier.
The Output Setting Screen will be displayed.
3
Touch [Tandem] to highlight it, then touch [OK].
VarioLink 9522
11
11-35