Recalling Previous Job Settings - Oce variolink 9522 User Manual

13
13.6

Recalling Previous Job Settings

Follow the procedure below to copy with a previous job settings.
Prerequisites
0 Only the last-completed output job settings can be recalled as the previ-
ous job settings. Incomplete job or reserve job settings cannot be re-
called, even if the setting operations have been made last.
0 The previous job settings can be recalled even after the machine power
is turned off then on.
1
Press [Mode Memory] on the control panel.
The Mode Memory Screen will be displayed.
2
Touch [Pre-Job Recall].
The [Job Check] key will become active on the screen.
3
Touch [Job Check] to review the settings.
The Check Screen will be displayed.
Check the previous job settings on the screen.
4
Touch [OK] on the Check Screen.
The settings of the previous output job will be recalled on the Copy
Screen.
5
Position the original, then press [Start].
13-18
Advanced Information
VarioLink 9522