Optional Components - Fuji Xerox ApeosPort-V C5575 Administrator's Manual

16 Appendix

Optional Components

The following table shows the optional components available. To purchase these options,
contact our Customer Support Center.
Duplex Automatic Document
Feeder B1-PC
Large Size UI Kit
HDD Extension Kit
Side Tray
Finisher-A1
Finisher-B1
Booklet Maker Unit for
Finisher-B1
2/4 Hole Punch Kit for
Finisher-B1
US 2/3 Hole Punch Kit for
Finisher-B1
C3 Finisher
C3 Finisher with Booklet
Maker
Transport Unit H1
Punch Unit 2/4H CD1
Punch Unit US 2/3H CD1
Folder Unit CD1
C3 Finisher Staple Unit 65
Sheets
HCF B1
Wing Table
16
Attention Light II
Assist Handle
Accessory Table A
656
Product Name
Scans multi-page duplex documents internally capturing both
sides at once.
A control panel with 10.4 inch SVGA color touch screen.
*1 Provides the extended copy features and adds the spool and scan
features.
Delivers output face up.
Staples output sheets.
Staples output sheets.
Staples output sheets. Also folds output sheets in half or staples
them.
2/4 hole-punches output sheets.
2/3 hole-punches output sheets.
Staples and hole-punches output sheets.
Staples or hole-punches output sheets. Also folds output sheets in
half or staples them.
Transfers paper output from the center tray to the C3 Finisher or
C3 Finisher with Booklet Maker.
2/4 hole-punches output sheets.
Note
2/3 hole-punches output sheets.
Note
Folds output sheets in bi-folded or tri-folded.
Staples output sheets. Up to 65 sheets can be stapled depending
on the type of paper.
A tray that can load 2,030 sheets of paper (When using 80 gsm
paper).
A kit to load related products such as IC Card Reader, or to secure
work space. The table can be placed either right or left side of the
document cover.
Tells you the status of the machine such as malfunction, printing,
or faxing status.
A tool to aid you in opening the document glass cover.
A kit to load related products.
Description
• C3 Finisher or C3 Finisher with Booklet Maker is required.
• Punch Unit 2/4H CD1 is included when you purchase the C3
Finisher or C3 Finisher with Booklet Maker.
• C3 Finisher or C3 Finisher with Booklet Maker is required.
• Punch Unit US 2/3H CD1 is included when you purchase the
C3 Finisher or C3 Finisher with Booklet Maker.