Fuji Xerox ApeosPort-V C5575 Administrator's Manual page 554

15 Problem Solving
Error Code
027-518 [Cause]
[Remedy] Confirm the password for the shared folder.
027-519 [Cause]
[Remedy] Take one of the following measures:
027-520 [Cause]
[Remedy] Confirm the access privilege to the SMB server.
027-521 [Cause]
[Remedy] Change the file name or forwarding destination folder of the scan server. Or, try moving
027-522
[Cause]
[Remedy] Take one of the following measures:
15
027-523
[Cause]
[Remedy] Check whether the specified name is being used for another file or folder on the SMB
554
Cause and Remedy
The machine failed to transfer data using SMB of the Scan to PC service because the
specified password was incorrect.
When the server is Macintosh, the specified user may not have been registered as a user
who is permitted to use File Sharing.
When the server is Macintosh, specify a user who is permitted to use File Sharing.
The machine failed to transfer data using SMB of the Scan to PC service because the
save location or file name specified for the scanned image had a problem.

The save location or the file name has a problem.

The specified save location does not exist on the server.
 Invalid characters are used in the save location or the file name.

Because the specified save location has the Distributed File System (DFS) settings, it
is linked to another shared folder.

Check whether the save location is correct

Check whether the specified file name can be used on the SMB server.

Confirm the Distributed File System (DFS) settings with your system administrator.
To confirm the settings, execute the following procedures:
1)Select [Start] > [Programs] > [Administrative Tools] > [Distributed File System] on the
SMB server.
2)Select the specified save location from the left side frame of the [Distributed File
System] window, and then confirm the target information displayed on the right side
frame of the window.
3)Specify the SMB server, shared name, and save location based on the information you
confirmed in step 2.
The machine failed to transfer data using SMB of the Scan to PC service because the file
name or folder name could not be retrieved.
The machine failed to transfer data using SMB of the Scan to PC service because the
suffix of the name of the file or folder exceeded the limit value.
or deleting the files within the forwarding destination folder.
During forwarding using SMB of the Scan to PC service, the scanned image file could not
be created on the SMB server because of one of the following reasons:

The specified file name already exists.

The specified file name has already been used.

The specified file name exists as a directory.

Invalid characters are used in the file name.

Check whether the specified file name can be used in the save location.

Check whether the specified file name has been used by another user.

Check whether the specified file name has been used for another file or folder.
The machine failed to transfer data using SMB of the Scan to PC service because a
folder could not be created on the SMB server. The specified folder already exists.
server.