Fuji Xerox ApeosPort-V C5575 Administrator's Manual page 171

Important • Align the paper guides against the paper to prevent paper jams or errors. If the machine cannot
 Paper Type
Select the type of paper to load in the trays.
For information about paper types available on the machine, refer to "Loadable Quantity and Weight" (P.47).
Paper Size

When the Three Tray Module is installed, you can load both standard size paper and non-
standard size paper for Trays 1 to 4. When you load non-standard size paper, select
[Custom Size], and then set the size in the X (width) direction and in the Y (length)
direction. For Tray 1, set the size in X (width) direction between 182 and 432 mm and the
Y (length) direction between 140 and 297 mm in 1 mm increments. For Trays 2 to 4, set
the X (width) direction between 182 to 457 mm and the Y (length) direction between 140
to 320 mm in 1 mm increments.
When the Tandem Tray Module is installed, you can load both standard size paper and
non-standard size paper for Tray 1 and 2. When you load non-standard size paper, select
[Custom Size], and then set the size in the X (width) direction and in the Y (length)
direction. For Tray 1, set the size in X (width) direction between 182 and 432 mm and the
Y (length) direction between 140 and 297 mm in 1 mm increments. For Tray 2, set the X
(width) direction between 182 to 457 mm and the Y (length) direction between 140 to
320 mm in 1 mm increments. For Trays 3 and 4, you can load standard size paper only.
For Tray 6 (HCF B1) (optional), you can load standard size paper only.
Select [Auto Detect] to use the standard size paper.
For more information, refer to "Supported Paper" (P.50).
Paper Color

Set the color of paper. The paper color selected here is displayed as the paper color on the
[Paper Supply] screen.
 Auto Paper Select
Set the condition for Auto Paper selection. When the color mode selected is used, Auto
Paper selection is enabled. Select from [All Colors], [Color], and [Black & White].
Automatic tray selection means that a tray containing the appropriate paper is
automatically selected by the machine for copying or printing.
Customize Paper Supply Screen
Select whether or not the setting items specified in [Paper Size] or [Auto Paper Select] under
[Paper Tray Attributes] are to be displayed on the [Paper Supply] screen.
 Disabled
Does not display the items specified in [Paper Size].
 Size Detection
Displays the setting in [Paper Size].
 Usage (Auto Paper Select)
Displays the setting in [Auto Paper Select].
Paper Tray Attributes on Setup Screen
Select whether or not to display [Paper Tray Attributes] in the [Setup] screen.
This setting allows you to select the size and type of paper without entering the System
Administration mode.
detect a tray, use Tray 5.
Common Service Settings
171
5