Default Print Paper Size - Fuji Xerox ApeosPort-V C5575 Administrator's Manual

Note
Offset Stacking (Center Tray - Lower)
Offsetting means that each set of copies is delivered to the center tray and shifted slightly
to separate it from the previous job. When a set of copies is delivered to the front of the tray,
the next set is delivered to the rear of the tray. Set the offset function for the Center Tray -
Lower. Select from [No Offset], [Offset per Set], and [Offset per Job]. When [Offset per Set]
or [Offset per Job] is selected, the machine slightly shifts the output position per set or per
job (print job) respectively.
Offset Stacking (Right Middle Tray)
Offsetting means that each set of copies is delivered to the center tray and shifted slightly
to separate it from the previous job. When a set of copies is delivered to the front of the tray,
the next set is delivered to the rear of the tray. Set the offset function for the Right Middle
Tray. Select from [No Offset], [Offset per Set], and [Offset per Job]. When [Offset per Set] or
[Offset per Job] is selected, the machine slightly shifts the output position per set or per job
(print job) respectively.
Note
Extra Center Tray
Allows you to select whether or not to use the Extra Center Tray.
Select from [Not Installed] and [Installed].
Booklet Offset
When [Offset Stacking (Center Tray)] or [Offset Stacking (Right Middle Tray)] is set to
[Offset per Set], the paper is output to the tray by being slightly displaced by set. If, however,
[Fold & Staple] is selected for booklet settings, the paper is not output by set.
Note
Auto Job Promotion
You can select whether or not to allow another job to automatically bypass the current job
when the machine is unable to start an operation for any reason, (for example, running out
of paper in a tray when starting copying or printing).
Select [Disabled] or [Enabled]. When [Enabled] is selected, you can select whether or not to
delete the bypassed jobs automatically. Select [Yes] to specify the period of time until a
bypassed job is deleted between 1 minute and 120 hours. (Type 2 (T2) model only)
Note

Default Print Paper Size

You can set the paper size, A4 or 8.5 x 11" to print reports and/or lists.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• Stored documents such as Secure Print and Sample Set documents cannot be used with the Auto
Job Promotion feature.
• When [Enabled] is selected and there is a job bypassed because of paper out, a message stating the
reason of the job promotion appears. The job bypassed can be processed after you take proper
measures by following the instruction of the message. Or, you can cancel the job by pressing the
<Clear All> button. When multiple jobs are bypassed, a screen that lists the bypassed jobs appears.
This screen allows you to display the details screen and to delete the jobs.
• When you have specified the time period to disable print jobs, the jobs received during the specified
time period is not deleted automatically even when you have selected [Yes] for [Automatically
Delete Held Jobs].
For more information on the setting to disable print jobs, refer to "Printer Lockout" (P.162).
Common Service Settings
191
5