Fuji Xerox ApeosPort-V C5575 Administrator's Manual page 719

color toner cartridges and drum cartridges are consumed even when your document is black
and white.
 Large Size UI Kit (optional)
By factory default, the date and time are displayed on the lower side of the touch screen

of the Large Size UI Kit. If you want to hid this date and time, contact our Customer
Support Center.
 The display format for the date and time can be changed in the System Administration
mode.
 The time is displayed by minutes and may differ from the actual time by seconds.
 On the [Job Status] screen, jobs listed in [Active Jobs] or [Completed Jobs] fill the entire
screen. Therefore, the date and time are not displayed on the [Job Status] screen.
 Operations during the Power Saver mode
It takes a few seconds before you can operate the system settings under [Tools] after the

machine exits the Sleep mode.
 The <Power Saver> button still lights up when you perform the operations which do not
light up the touch screen such as printing command from a computer.
A message does not appear on the touch screen if you open and close the top cover of the

document feeder when the document feeder is deactivated (such as when the service to
use a scanner is not selected). However, the confirmation message appears on the touch
screen and the <Error> indicator lights up when the document feeder is activated (exits
the Power Saver mode) while the top cover is open.
 The confirmation indicator does not light up if the document is loaded while the
document feeder is in the Power Saver mode (such as when the service to use a scanner
is not selected). However, the confirmation indicator lights up and the document is
detected when you load the document and then make the machine exit the Power Saver
mode.
The machine exits the Power Saver mode when you open the document cover to copy or

scan.
 After the machine exits the Power Saver mode, the document feeder and scanner device
are activated after the document cover is opened while the scanner device is deactivated.
However, to make the document detected on the document glass, make sure that the
scanner device in the document glass moves to the detect position for the document size,
and then close the document cover.
 After the machine is activated from the Power Saver mode, a message does not appear
on the touch screen if you perform the following operations while the service to be used
for the output device, such as copying and secure printing, is not selected.
- Opening and closing the top cover of the document feeder
- Opening and closing the front cover
- Opening and closing the bottom left cover
- Opening the paper tray
- All the operations including opening and closing the front cover of the finisher, and
pressing the buttons
However, the confirmation message appears and the <Error> indicator lights up when the
machine is activated (exits the Power Saver mode) while each cover or a paper tray is
open.
 After the machine exits the Power Saver mode, the value detected before the machine
enters the Power Saver mode is displayed or informed as paper tray status and the
Notes and Restrictions
719
16