Basic Settings - Fuji Xerox ApeosPort-V C5575 Administrator's Manual

16 Appendix

Basic Settings

Parameter
Document size
Paper size
16
700
Item No.
101 Sets the document size created by a computer.
[0]
[1]
[2]
[3]
[4]
[5]
[10]
[11]
[12]
[13]
[14]
[15]
[99] (Default)
[100]
When [Auto] is selected, the settings of the Scaling mode, the Area
Determination mode, and the Paper Margin settings of Print Control become
enabled.
Note • If the document size other than [Auto] is selected, the settings under [Auto
layout] become [ON].
• Depending on the combination of [Document size] and [Paper size], the
document is printed at a scale of 100%.
102 Sets the default paper size. Only available when [Paper tray] is set to [Auto] or
[Tray 5]. Only cut sheet can be set.
[3]
[4] (Default)
[5]
[14]
[15]
[99]
[101] (Default) : A Size
Important • When Trays 1 to 4, Tray 6 is selected, [Paper size] cannot be set. The paper
size loaded in the specified tray is displayed.
• If [A Size] or [Auto] is selected, the settings become as follows:
Note
- When [Document size] is set to other than [Auto], [Paper size] is set to
- When Trays 1 to 4, Tray 6 is selected, the paper size is determined by the
- Depending on the combination of [Document size] and [Paper size], [?]
Value
: A0
: A1
: A2
: A3
: A4
: A5
: B0
: B1
: B2
: B3
: B4
: B5
: Auto
: Paper
: A3
: A4
: A5
: B4
: B5
: Auto
[A3].
size of paper loaded in the tray, and thus [Paper size] cannot be set.
may be displayed for the magnification. In this case, the document is
printed at a scale of 100%.