Fuji Xerox ApeosPort-V C5575 Administrator's Manual page 520

15 Problem Solving
Error Code
017-747 [Cause]
[Remedy] Wait for a while, and then execute the operation again. If the same message is
017-748 [Cause]
[Remedy] Confirm the network setting of the machine.
017-749 [Cause]
[Remedy] Confirm the job flow settings.
017-750
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
017-751 [Cause]
[Remedy] Confirm the detail from [Transmission Report - Job Undelivered].
017-755
[Cause]
[Remedy] Take one of the following measures:
017-756 [Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
017-759 [Cause]
[Remedy] Contact our Customer Support Center.
017-760 [Cause]
[Remedy] For 1, set the correct port number for the POP3 server.
017-761
[Cause]
[Remedy] Use the valid server certificate for the POP3 server.
15
017-762 [Cause]
[Remedy] Be sure to match the time set on the POP3 server and the machine. If the time matches,
017-763 [Cause]
[Remedy] Be sure to match the time set on the POP3 server and the machine. If the time matches,
017-764
[Cause]
[Remedy] Use the valid server certificate in which the correct server address is written.
520
Cause and Remedy
Connection to ApeosWare Authentication Agent to the database timed out because of
an overload.
displayed again, contact our Customer Support Center.
Data could not be sent due to the incorrect machine setting.
An error occurred.
A plug-in error occurred.
on the machine power. If the same message is displayed again, reinstall the plug-in.
A plug-in error occurred.
Cannot download a software.

Confirm that [Enabled] is checked in CentreWare Internet Services under [Properties]
> [Services] > [Machine Software]> [Upgrades].
 Download the software through USB connection.
An error occurred in the machine.
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
An error occurred during firmware update in the machine.
An error occurred in connecting to the POP3 server. Probable causes are follows.
1.
When connecting to the POP3 server by the TLS communication, the port number is
incorrect.
2.
When connecting to the POP3 server by the SSL communication, an internal error
occurred.
For 2, switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error still is not resolved, contact our Customer
Support Center.
A SSL server authentication error occurred because the server certificate for the POP3
server is invalid.
The server certificate for the POP3 server is before the valid period.
use the valid server certificate.
The server certificate for the POP3 server is expired.
use the valid server certificate.
The server addresses of the POP3 server and the server certificate are not same.