Fuji Xerox ApeosPort-V C5575 Administrator's Manual page 509

Error Code
016-592 [Cause] The machine failed to access the NEXTNAME.DAT file using FTP of the Scan to PC
service.
[Remedy] When [Add to Existing Folder] is set as the process to be executed in case of a file name
duplication, check the NEXTNAME.DAT file is correct.
016-593 [Cause] The machine failed to transfer data using FTP of the Scan to PC service because an
internal error occurred after connection to the FTP server.
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
Support Center.
016-594 [Cause] The machine failed to transfer data using FTP of the Scan to PC service because a
network error occurred.
016-595
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
Support Center.
016-596 [Cause] The machine failed to transfer data using FTP of the Scan to PC service because a
network error occurred.
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
Support Center.
016-597 [Cause] The machine failed to transfer data using FTP of the Scan to PC service because a
network error occurred.
[Remedy] Stop all accesses from the other devices, and then execute the operation again. If the
error still is not resolved, contact our Customer Support Center.
016-598
[Cause] The size of an e-mail page exceeds the maximum message size because of page
splitting.
016-599
[Remedy] Take one of the following measures:


For more information on [Quality/File Size], refer to "5 Scan" > "E-mail Options/Filing Options" > "Quality/File Size
(Specifying an Image Compression Ratio When Scanning)" in the User Guide.
For more information on [Maximum Split Count], refer to "Maximum Split Count" (P.277).
016-700 [Cause] The job was suspended because the number of the digits for the Secure Print or Charge
Print passcode set on the print driver was less than the value specified in [Minimum
Passcode Length for Stored Job] on the machine.
[Remedy] On the print driver, set the passcode string equal to or longer than the value specified in
[Minimum Passcode Length for Stored Job].
016-701
[Cause] Unable to process print data because of insufficient memory.
[Remedy] Stop unnecessary ports or delete unnecessary data to increase memory.
016-702
[Cause] Unable to process print data because of insufficient print page buffer.
[Remedy] Take one of the following measures:



For more information on the [Image Quality], refer to the help of the print driver. For more information about memory,
refer to "Allocate Memory" (P.244).
Cause and Remedy
Reduce the file size for [Quality/File Size].
Increase the value for [Maximum Split Count].
Set [Image Quality] to [Standard].
Increase the print page buffer size.
Add memory.
Error Code
15
509