Software Upgrade - Fuji Xerox ApeosPort-V C5575 Administrator's Manual

5 Tools
 Adjust Booklet Fold Position
Set the booklet fold position for paper smaller or larger than B4.
 Adjust Fold Position
You can adjust the fold position for each paper type and can set up to 10 adjustment type.
Also, you can assign the type to each tray.
 Fold Position Type Setup
Adjust the position for Single Fold, Booklet, C Fold, Z Fold, and Z Fold Half Sheet.
For more information on setting procedures, refer to "Fold Position Adjustment" (P.659).
Trays 1 to 4, and 6

Assign an adjustment type to each tray.
 Fold Assisting Crease
Set the number of additional folding lines between the specified fold line to prevent the
output of the folded booklet from opening.
Select from [1 Crease per Side], [2 Creases per Side], [3 Creases per Side], and [No Crease].
Note
Adjust Image Transfer
5
You can specify the transfer output value for each paper type. This is useful when the toner
image does not transfer to the paper properly.
For more information, refer to "Adjust Image Transfer" (P.667).

Software Upgrade

When EP system via the Internet is used, this feature is used to upgrade the software for EP
system when the version upgrade is required.
You can specify when to start the software upgrade.
Important • After the downloading is finished, the machine automatically restarts and upgrades the software.
Note
For information on EP system, refer to "EP System" (P.758).
1
Select [Software Upgrade].
 Start Upgrade
Starts a version upgrade soon.
 Schedule Upgrade
Select [On] and specify the date and time to start a version upgrade.
Adjust Paper Registration
Allows you to adjust the print image position vertically and horizontally. You can enter from
-2.0 to + 2.0, and select [Adjust] after entering the values. When you enter the amount in
[Number of Sheets] and select [Sample Printout], the machine prints the sample that the
values changed are reflected.
180
• The fewer the folding lines, the stronger the formation of creases. The more the folding lines, the
slower the booklet creation speed.
• Even with the folding lines, the booklet may be open depending on the paper size or paper type.
After the machine restarts again and the Services Home screen is displayed, the software upgrade is
completed.
• EP system may not be available in your region. For more information, contact our Customer Support
Center.
• To use this feature, a dedicated contract is needed in addition to a use of the EP system service. For
more information, contact our Customer Support Center.