Fuji Xerox ApeosPort-V C5575 Administrator's Manual page 513

Error Code
016-739 [Cause] Used an unsupported combination of document size and paper size when specifying
booklet creation with PostScript (optional).
[Remedy] Specify a combination of document size and paper size supported for booklet creation,
and try printing again.
016-740 [Cause] Used an unsupported paper tray when specifying booklet creation with PostScript
(optional).
[Remedy] Specify a paper tray supported for booklet creation, and try printing again.
016-741
[Cause] An error occurred during the update process of the machine.
016-742
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
016-743
on the machine power. If the error still is not resolved, contact our Customer Support
016-744 Center.
016-745
016-746 [Cause] An unsupported feature is included in the received PDF.
[Remedy] Print using a print driver.
016-747 [Cause] The memory became insufficient when using the Repeat Image feature and the
Annotations features simultaneously.
[Remedy] Take one of the following measures:



016-748 [Cause] Unable to print because of insufficient hard disk space.
[Remedy] Reduce the number of print pages by dividing the print data or by printing one copy at
a time when printing multiple copies.
016-749 [Cause] Probable causes are as follows:
For a print job:
1) The printer language received from the print driver is unsupported by this machine.
For printing of a document received by Internet Fax:
2) The printer language of the document received from the remote machine is
unsupported by this machine.
[Remedy] For 1), use the machine's print driver for printing. If the error still is not resolved, contact
our Customer Support Center.
For 2), request the sender to send Internet fax documents using a printer language
supported by the machine.
Note • An optional component must be installed for some printer languages such as PostScript. For more
016-750 [Cause] The machine received a printing job ticket with a PDF, an XPS from an application (such
as ContentsBridge) that allows direct transmissions of files, but the printing job ticket
data had a grammar or print instruction unsupported by the machine.
[Remedy] Check whether you are correctly using the application (such as ContentsBridge) and
whether the print instruction was correct.
If your application usage and print instruction are correct, check with the application
manufacturer that sent the print job for operations of the application.
If the error still is not resolved, have the Configuration Report, the Job History Report,
and the print data with the printing job ticket ready, and contact our Customer Support
Center.
Note • XPS stands for XML Paper Specification.
Cause and Remedy
Increase the annotation image size.
Reduce the usage of Repeat Image.
Increase memory (only for the machine with the optional add-on memory).
information, contact our Customer Support Center.
Error Code
15
513