Fuji Xerox ApeosPort-V C5575 Administrator's Manual page 701

Parameter Item No.
Paper tray 103
Coordinate 104
rotation
Color mode 105
Extended Settings
Parameter Item No.
Auto layout 106
Active palette 107
No. of prints 108
Output 109
destination
2 sided printing 110
Alphanumeric 112
fonts
Sets the paper tray to be used for printing.
[0] (Default) : Auto
[1] : Tray 1
[2] : Tray 2
[3] : Tray 3
[4] : Tray 4
[5] : Tray 5
[6] : Tray 6 (HCF B1)
Important • When Trays 1 to 4, Tray 6 is selected, the paper size is determined by the
size of paper loaded in the tray, and thus [Paper size] cannot be set.
• When [Auto] is selected and paper of the same size in the same orientation
Note
in multiple trays is loaded, paper will be fed in the order of Tray 1  Tray 2
 Tray 3  Tray 4  Tray 6. If paper of the same size is loaded in multiple
trays but in different orientations, feeding of the paper loaded in the
landscape orientation is prioritized.
Sets the paper orientation for printing.
[0] (Default) : 0 degree
[1] : 90 degree
Sets the color mode.
[0] : Color
[1] (Default) : Grayscale
[2] : Black pen
Selects whether to perform auto layout of the document or not.
[0] (Default) : ON
[1] : OFF
Selects whether to use a pen specified by command or set on the panel.
[0] (Default) : Command
[1] : Panel
Sets the number of copy to be printed.
[1] - [250] (Default: 1) : 1 - 250
Sets the output tray for the printouts.
[0] (Default) : Center Tray - Lower
[1] : Side Tray (optional)
[2] : Center Tray - Upper (optional)
[80] : Right Middle Tray (optional)
[81] : Right Top Tray (optional)
Sets 2 sided printing.
[0] (Default) : None
[1] : Head to head
[2] : Head to toe
Sets the font for single-byte characters.
For more information on fonts, refer to "Internal Fonts" (P.654).
[0] (Default) : Stroke
[1] : Roman
[2] : Sans serif
HP-GL/2 Emulation
Value
Value
16
701