Fuji Xerox ApeosPort-V C5575 Administrator's Manual page 551

Error Code
026-718 [Cause] Incompatible print parameters are used. The combination of the specified features such
as Document Size, Paper Size, Paper Tray, 2 sided printing, and Output Tray is
incompatible.
[Remedy] Confirm the print data, and try printing again.
026-719 [Cause] An error occurred while operating the Store to USB service.
[Remedy] Wait for a while and execute the operation again. If the error still is not resolved, contact
our Customer Support Center.
026-720
[Cause] The capacity of the USB memory device of the recipient is insufficient while performing
the Store to USB service.
[Remedy] Confirm the amount of available space.
026-721 [Cause] An error occurred while operating the Store to USB service.
[Remedy] Check the following conditions:



026-722
[Cause] The USB memory device is not initialized.
[Remedy] Initialize the USB memory device on a computer with the following file format, and then
execute the operation again.

Note • NTFS is not supported.
• A software-encrypted USB memory device is not supported.
If the error still is not resolved, contact our Customer Support Center.
026-723 [Cause] The machine failed to access to the medium.
[Remedy] 1)Check that the medium is not inserted or removed, or the other medium is not
2)Check that the file in the medium can be accessed via a computer.
026-724 [Cause] An error occurred while connecting to the EP system via the Internet.
026-725
[Remedy] Contact our Customer Support Center.
026-726 [Cause] The machine configuration information at a print job specification does not match the
actual machine configuration.
[Remedy] Modify the machine configuration information in the print driver screen to match the
actual machine configuration.
026-727 [Cause] Probable causes are as follows:
1)Unusable characters are included in the path name of the file location.
2)The length of the path name of the file location (including extension) exceeds the
[Remedy] Take one of the following measures:
1)Change the path name of the file location.
2)Set the path in the range of 1 to 255 bytes.
026-730 [Cause] The size of paper loaded in the specified tray is unknown.
[Remedy] Check whether the paper guides are correctly positioned in the tray, and then try again.
026-736 [Cause] An internal error occurred while sending the scanned document to the HTTP server.
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
Support Center.
Cause and Remedy
The USB memory device is inserted into the USB memory slot.
The USB memory device is accessible from your computer.
The unencrypted USB memory device is used.
Supported file formats: FAT12, FAT16 (FAT), FAT32
inserted, while the machine is referencing the medium.
number of characters available.
Error Code
15
551