Fuji Xerox ApeosPort-V C5575 Administrator's Manual page 90

3 Maintenance
1
Make sure that the machine is not operating,
and open the finisher front cover.
2
Pull the staple cartridge out of the finisher.
3
3
After you pull out the staple cartridge, check
inside of the finisher for any remaining staples.
4
Pinch both sides of the empty staple case with
your fingers (1), and remove the staple case
from the cartridge (2).
5
Insert the front side of the new staple case into
the staple cartridge (1), and then push the rear
side into the cartridge (2).
90