Time Zone - Fuji Xerox ApeosPort-V C5575 Administrator's Manual

5 Tools
Printer Lockout
You can set the machine to disable printing during the specified time period or to
temporarily disable printing.
Selecting [On] allows you to set [Set Lockout Duration] and/or [Allow User to Lock Out].
When [Allow User to Lock Out] is selected, the [Lock Out Printer] button needs to be
displayed on the right side of the Services Home screen.
For information on how to display the [Lock Out Printer] button on the Services Home screen, refer to "Customizing the
Button Layout" (P.33).
 Set Lockout Duration
Set the time period to disable printing. Specify the start and end time to disable printing in
1 minute increments.
 Allow User to Lock Out
Selecting [Lock Out Printer] on the Services Home screen temporarily disables printing.
[Release Printer] is displayed during the printer lockout duration. Selecting [Release Printer]
enables printing.
Note
5

Time Zone

Set the time difference from GMT between -12 and +12 hours.
Note
Daylight Savings
You can set daylight saving time. During daylight saving time period, the machine moves
the clock forward by one hour.
Select from [Adjust Off], [Adjust by Day, Month & Time], and [Adjust by Month, Week, Day
of Week & Time].
If you select [Adjust by Day, Month & Time], specify the month, day, and time for [Start
Date] and [End Date].
If you select [Adjust by Month, Week, Day of Week & Time], specify the month, week, day
of week, and time for [Start Date] and [End Date].
162
• A job started before the start time will be printed continuously even after elapsing the start time.
The job will be printed continuously even if you select [Lock Out Printer] while printing. After the job
is completed, the machine enters the printer lockout status.
• When both [Set Lockout Duration] and [Allow User to Lock Out] are set and the start time comes
while the [Release Printer] button is displayed, the machine automatically enters the printer lockout
status.
• When you select [Release Printer] during the printer lockout duration, printing is enabled, and when
you then select [Lock Out Printer], the machine resumes the printer lockout status.
• The printer lockout status is not released automatically even after the end time elapsed. To release
the printer lockout status, the control panel operation is required.
• The printer lockout duration will not be released even when you switch the power off and then on
again, or even when you press the <Power Saver> button while the machine is in the Power Saver
mode (Low Power mode or Sleep mode).
• The machine starts printing in accordance with the setting in [Auto Print] when [Release Printer] is
selected. Thus the printing may not start just after [Release Printer] is selected.
• You can also print during the printer lockout duration by selecting a job in [Active Jobs] on the [Job
Status] screen and then selecting [Promote Job].
• When the [Allow User to Lock Out] check box is deselected, [Disable Auto Printing] in [Services Home
- Additional Features] is displayed as [(Not Assigned)].
• GMT stands for Greenwich Mean Time.