5.2 Optional Components
The following table shows the optional components available. To purchase these options, contact your
local Fuji Xerox representative.
Postcard Kit 2
Punch Unit
USB port expansion kit
Counter-earthquake kit
Mobility plates
Note
The optional components are subject to change without notice.
For the latest information, contact your local Fuji Xerox representative.
78
Printer Unit Manual
The kit to load postcards in the High Capacity Tray.
Note
One set is included in the standard accessories. The Kit is required to
load postcards in the Trays 6 and 7.
A unit that must be installed with Finisher to perform hole punching.
The kit to add an extra USB port for USB authentication device.
Bolts and clamps to fix the machine to the floor.
Plate reinforcements to be used on the floors with low load bearing or uneven
floors when installing the machine.