Fuji Xerox ApeosPort-V C5575 Administrator's Manual page 584

15 Problem Solving
Error Code
116-388 [Cause]
[Remedy] Install the hard disk. Contact our Customer Support Center.
116-389 [Cause]
[Remedy] Install the Extension System Memory. Contact our Customer Support Center.
116-390 [Cause]
[Remedy] Follow the message displayed on the touch screen and initialize the memory of the
116-391 [Cause]
116-392
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
116-393
116-394
116-395
116-396
116-397
116-399
116-700
[Cause]
[Remedy] Select Standard for the image quality.
116-701 [Cause]
[Remedy] Increase memory, or install the hard disk if it is not installed.
116-702 [Cause]
[Remedy] Check the print data.
116-703 [Cause]
[Remedy] For 1), check the print data.
116-704 [Cause]
[Remedy] Check whether the media is inserted correctly.
116-705 [Cause]
116-706
[Remedy] Use a computer to confirm the content recorded on the media.
116-707
116-708
116-709
15
116-710 [Cause]
[Remedy] Increase the size assigned to HP-GL/2 auto layout memory.
116-711 [Cause]
[Remedy] Match the size and orientation of the paper with the form specified, and print again.
116-713 [Cause]
[Remedy] Delete unnecessary data from the hard disk to free up disk space.
584
Cause and Remedy
The optional hard disk is not installed.
The Extension System Memory is not installed.
An error occurred in the machine.
machine.
An error occurred in the machine.
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
Memory is insufficient for Image Extension Kit (optional).
Unable to use the 2 Sided Printing feature because of insufficient memory.
A print job was processed using a substitute font.
Probable causes are as follows:
1)An error occurred during Post Script (optional) processing.
2)An error occurred because of insufficient memory.
3)An error occurred because of insufficient memory for PostScript processing.
For 2), increase memory.
For 3), increase the value for [PostScript Memory].
An error occurred when reading data on the media.
An error occurred when reading data on the media.
The correct document size could not be judged because the receive data exceeded the
HP-GL/2 spool size.
The size and orientation of the form specified are not matched with the paper to be
printed.
The data has been divided into a number of jobs because of insufficient disk space.