Table of Contents
Advertisement
2
Select any option.
Auto Detect
Detects the document size automatically.
Auto-detectable
Document size
Note
• If the document size cannot be detected automatically, a screen to enter the document size
The document sizes that can be automatically detected depend on [Paper Size Settings] in the System
Administration mode. For information on [Paper Size Settings], refer to "5 Tools" > "Common Service
Settings" > "Other Settings" > "Paper Size Settings" in the Administrator Guide.
Standard Size
Select the original size from preset sizes.
You can change the sizes displayed on the screen. For more information, refer to "5 Tools" > "Fax
Service Settings" > "Original Size Defaults" in the Administrator Guide.
Mixed Sized Originals (Scanning Different Size Documents Simultaneously)
You can scan documents of various sizes simultaneously and send faxes using each
size or a single size of paper. To use this feature, load the documents in the document
feeder.
Important • Load documents in landscape orientation. However, always load A5 and B5 documents in
• When loading documents, align the top left corners of the documents properly. Otherwise, a
• The recommended document size combinations are A4 portrait and A3 landscape, or B5
Note
• Be sure to set [Original Size] to [Auto Detect] on the [Layout Adjustment] screen, when using
• This feature does not appear for some models. An optional component is required. For more
1
Select [Original Size].
Document Feeder
B5, B5 , B4, A5, A5 , A4,
A4 , A3, 8.5 × 11",
8.5 × 11"
8K
appears.
portrait orientation so that the machine can detect the size of the documents automatically.
paper jam may occur.
portrait and B4 landscape. If another combination of document sizes is used, the documents
can be fed at an angle and may not be scanned properly.
the Mixed Sized Originals feature.
information, contact our Customer Support Center.
Document Glass
B6, B5, B5 , B4, A6, A5,
A5 , A4, A4 , A3
, 11 × 17, 16K ,
Layout Adjustment
4
185
Advertisement
Table of Contents
